Optimal Spherical Masonry Domes of Uniform Strength
Publication: Journal of Structural Engineering
Volume 123, Issue 2
Abstract
In this paper, the problem of spherical masonry domes of uniform strength is examined. For masonry domes of variable thickness it is proved that the change in the sign of the circumferential stresses can occur for considerably larger angles, depending on the shape of the shell profile. The uniform strength thickness is explicitly given solving an eigenvalue problem associated to the equilibrium integral equation. The thickness law for the closed dome subject to self-weight and, possibly, to a superimposed uniform distributed load, and for the open dome subject to the weight of a lantern is obtained. Finally, the problem for a dome exhibiting a bidimensional behavior in the upper calotte and a one-dimensional (1D) behavior below is solved. Masonry is assumed to be a material not able to resist against tensile stresses. Moreover, it is assumed to be either indefinitely resistant in compression or with a cutoff in compressive stresses.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Beltrami, E. (1882). Sull'equilibrio delle superfici flessibili ed inestensibili, V.T. III Opera (in Italian).
2.
Bossut, C. (1778). “Nouvelles recherches sur l'equilibre des voutes en dome.”Memories Academiae Royale des Sciences, Paris, France, 587–597 (in French).
3.
Bouguer, P. (1734). “Sur les lignes courbes qui sont propres a former les voutes en dome.”Memories Academiae Royale des Sciences, Paris, France, 149–166 (in French).
4.
Capurso, M., and Sacchi, G.(1971). “Una condizione di plasticità per solidi anisotropi.”Atti 1° Congresso Naz. Meccanica Teorica ed Applicata, Udine, Italy, 2, 379–395.
5.
Contro, R., and Nova, R. (1982). “Modelli fisici e matematici del legame sforzi-deformazioni e del comportamento a collasso della muratura.”Comportamento statico e sismico delle strutture murarie, Cup, Milano, Italy, 13–87 (in Italian).
6.
Delbecq, J. M. (1982). “Analyse de la stabilité des voûtes en maçonnerie.”J. de Mecanique Therorique et Appl., Paris, France, 1(I), 91–121 (in French).
7.
Del Piero, G.(1989). “Constitutive equations and compatibility of the external loads for linear elastic masonry-like materials.”Meccanica, Bologna, Italy, 24(3), 150–162.
8.
Di Pasquale, S. (1984). Statica dei solidi murari: teoria ed esperienze. Dipartimento di Costruzioni Facoltà di Architettura di Firenze, Firenze, Italy.
9.
Dow, M., Nakamura, H., and Rozvany, G. I. N.(1982). “Optimal cupola of uniform strength: spherical M-shells and axisymmetric T-shells.”Ing. Arch., 52, 335–353.
10.
Flügge, W. (1962). Stress in shells. Springer-Verlag, Berlin, Germany.
11.
Giaquinta, M., and Giusti, E.(1985). “Researches on the equilibrium of masonry structures.”Arch. Rational Mech. and Anal., 88, 359–392.
12.
Heyman, J.(1966). “The stone skeleton.”Int. J. Solids Struct., 2, 249–279.
13.
Heyman, J. (1977). Equilibrium of shell structures. Clarendon Press, Oxford, England.
14.
Lévy, M. (1888). La statique graphique et ses applications aux constructions, IV Parte, Gauthier-Villars, Paris, France, 42–52 (in French).
15.
Love, A. E. H. (1962). A treatise on the mathematical theory of elasticity. Dover Publications, Inc., New York, N.Y.
16.
Mascheroni, L. (1785). Nuove ricerche sull'equilibrio delle volte. Francesco Locatelli, Bergamo, Italy (in Italian).
17.
Nakamura, H., Dow, M., and Rozvany, G. I. N.(1981). “Optimal spherical cupola of uniform strength: allowance for self-weight.”Ing. Arch., 51, 159–181.
18.
Oppenheim, I. J., Gunaratnam, D. J., and Allen, R. H.(1989). “Limit state analysis of masonry domes.”J. Struct. Engrg., ASCE, 115(4), 868–882.
19.
Prager, W., and Rozvany, G. I. N.(1980). “Optimal spherical cupola of uniform strength.”Ing. Arch., 49, 287–293.
20.
Villarceau, Y. (1854). “Mémoire sur l'etabilissement des arches de pont, envisagé on point de vue de la plus grande stabilité.”Mém. Acad. des Sciences, Paris, France.
21.
Ziegler, H.(1958). “Kupplen gleicher Festigkeit.”Ing. Arch., 26, 378–382.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Feb 1, 1997
Published in print: Feb 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.