Posttensioned and Shaped Hypar Space Trusses
Publication: Journal of Structural Engineering
Volume 123, Issue 2
Abstract
This paper describes a kind of innovative posttensioned and shaped hypar space truss characterized by an economical fabrication and construction process. The hypar truss, assembled initially in a planar square layout on the ground, is posttensioned at the short bottom chords at one diagonal. As a result, the top chords become curved and thereby a nonzero Gaussian curvature surface of a hypar space truss is shaped. A distinguishing feature of posttensioned and shaped hypar trusses, compared with conventional metal trusses, is that the shape formation and erection is completed by a simple posttensioning process, rather than by the traditional techniques involving the use of cranes and scaffolding. The essential aspects of shape formation are discussed and a small-scale posttensioned and shaped hypar is formed in this paper. Results of experiment and nonlinear finite-element analysis indicate that, even within the yield limit of the members, a planar square layout can be deformed to a significant hypar shape by the proposed shape formation method. Potentially, this procedure can offer economies over traditional construction methods.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Calladine, C. R.(1978). “Buckminster Fuller's tensegrity structures and Clerk Maxwell's rule for the construction of stiff frames.”Int. J. Solids Struct., 14(3), 161–172.
2.
Clarke, M. J., and Hancock, G. J.(1995). “Test and nonlinear analysis of small-scale stressed-arch frames.”J. Struct. Engrg., ASCE, 121(2), 187–200.
3.
Dehdashti, G. (1994). “Shape formation and ultimate load behaviour of post-tensioned space trusses,” PhD thesis, Univ. of Wollongong, Australia.
4.
Dehdashti, G., and Schmidt, L. C. (1995). “Hypar space trusses formed by means of post-tensioning.”Proc., Int. Conf. on Lightweight Struct. in Civ. Engrg., Magat-Magdalena Burska, Warsaw, Poland, 629–636.
5.
Ellen, P. E. (1986). “The design and development of post-tensioning steel structures.”Proc., 1st Pacific Struct. Steel Conf., Vol. 3, New Zealand Heavy Engrg. Res. Assn., Manukau City, New Zealand, 69–74.
6.
Hoe, T. T., and Schmidt, L. C.(1986). “Ultimate load behaviour of a barrel vault space truss.”Int. J. Space Struct., 2(1), 1–10.
7.
Isler, H. (1994). “Concrete shells today.”Proc., IASS-ASCE Symp., ASCE, New York, N.Y., 820–836.
8.
Knudson, W. C.(1991). “Recent advances in the field of long span tension structures.”Engrg. Struct., 13(2), 164–177.
9.
Mirmiran, A., and Amde, A. M. (1995). “Effects of fabrication processes on prestressed composite arches.”J. Struct. Engrg., ASCE, 121(1), 124–131. MSC/NASTRAN user's manual; Version 68 . (1995). The MacNeal-Schwendler Corporation, Los Angeles, Calif.
10.
Ramm, E., and Mehlhorn, G.(1991). “On shape finding methods and ultimate load analyses of reinforced concrete shells.”Engrg. Struct., 13(2), 178–198.
11.
Schmidt, L. C.(1985). “Single-chorded plane space trusses.”Int. J. Space Struct., 1(1), 69–74.
12.
Schmidt, L. C. (1989). “Erection of space trusses of different forms by tensioning of near mechanisms.”Proc., IASS Congr., Vol. 4, Cedex-Laboratorio Central De Estructuras Y Materiales, Madrid, Spain.
13.
Schmidt, L. C., and Dehdashti, G. (1993). “Shape creation and erection of metal space structures by means of post-tensioning.”Space structures 4, Thomas Telford, Ltd., London, England, 69–77.
14.
Schmidt, L. C., and Li, H.(1995). “Geometric models of deployable metal domes.”J. Arch. Engrg., ASCE, 1(3), 115–120.
15.
Schmidt, L. C., Li, H., and Chua, M. (1996). “A hexagonal grid dome shaped by post-tensioning method.”Proc., Asia-Pacific Conf. on Shell and Spatial Struct., China Civ. Engrg. Soc., Beijing, China, 146–153.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 123 • Issue 2 • February 1997
Pages: 130 - 137
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Feb 1, 1997
Published in print: Feb 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.