Seismic Response of Light-Frame Wood Buildings
Publication: Journal of Structural Engineering
Volume 123, Issue 11
Abstract
A general three-dimensional (3D) model of light-frame wood buildings is presented. The model has the capabilities of dealing with different structural configurations and different types of loading. Comprehensive verification studies are performed to check the accuracy of the model by comparing with some available experimental data. The proposed model shows excellent correlation with the experimental data. As an application, investigations are conducted to evaluate the seismic response of light-frame wood buildings with different geometric configurations. The effects of the asymmetric in-plane stiffness, dimensions of the horizontal diaphragm, the presence of partition walls, and the ground motion intensity on the structural response are studied. The corresponding load distribution of lateral forces among the shear walls and the deflections of horizontal diaphragms are the main parameters of this study. The application study indicates that rigidity of the horizontal diaphragm is influenced by its dimensions and that partition walls resist a substantial amount of seismic forces depending on their stiffness and the dimensions of the horizontal diaphragm.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bathe, K. (1982). Finite element procedures in engineering analysis. Prentice-Hall, Inc., Englewood Cliffs, N.J.
2.
Cheung, C. (1984). “Dynamic response of wood diaphragms in low-rise wood-framed buildings,” PhD thesis, Washington State University, Pullman, Wash.
3.
Dolan, J. D. (1989). “The dynamic response of timber shear walls,” PhD thesis, The University of British Columbia, Vancouver, Canada.
4.
Falk, R. (1986). “Damage and collapse behavior of low-rise wood framed buildings,” PhD dissertation, Washington State University, College of Engineering, Pullman, Wash.
5.
Filiatrault, A.(1990). “Static and dynamic analysis of timber shear walls.”Can. J. Civ. Engrg., Ottawa, Canada, 17, 643–651.
6.
Foschi, R.(1977). “Analysis of wood diaphragms and trusses, Part I: Diaphragms.”Can. J. Civ. Engrg., Ottawa, Canada, 4, 345–352.
7.
Itani, R., and Cheung, C.(1983). “Nonlinear analysis of sheathed wood diaphragms.”J. Struct. Engrg., ASCE, 110(9), 2137–2147.
8.
Jackson, J. A. (1989). “Gravity load effects on lateral load resistance of diaphragms,” MS thesis, Washington State University, Pullman, Wash.
9.
Kamiya, F. (1988). “Nonlinear earthquake response analysis of sheathed wood walls by a computer-actuator on-line system.”Paper presented at The 1988 Int. Conf. on Timber Engrg., Seattle, Wash., Vol. 1, 838–847, Forest Products Res. Soc., Madison, Wis.
10.
Kasal, B. (1992). “A nonlinear three-dimensional finite-element model of light-frame wood structure,” PhD thesis, Oregon State Univ., Corvallis, Oreg.
11.
Kivell, T., Moss, P. J., and Carr, A. J.(1981). “Hysteretic modeling of moment-resisting nailed timber joints.”Bull. New Zealand Nat. Soc. for Earthquake Engrg., Waikanae, New Zealand, 14(4), 233–243.
12.
Liska, A. J., and Bohannan, B.(1973). “Performance of wood construction in disaster areas.”J. Struct. Div., ASCE, 99(12), 2345–2354.
13.
McCutcheon, W.(1985). “Racking deformations in wood shear walls.”J. Struct. Engrg., ASCE, 111(2), 257–269.
14.
NEHRP recommended provisions for the development of seismic regulations for new buildings. (1991). Part 2 Commentary, Federal Emergency Management Agency, Washington, D.C.
15.
Phillips, T., Itani, R., and McLean, D.(1993). “Lateral load sharing by diaphragms in wood-framed buildings.”J. Struct. Engrg., 119(5), 1556–1571.
16.
Polensek, A., and Schimel, B.(1991). “Dynamic properties of light-frame wood subsystems.”J. Struct. Engrg., ASCE, 117(4), 1079–1095.
17.
Schmidt, R., and Moody, R.(1989). “Modeling laterally loaded light-frame buildings.”J. Struct. Engrg., ASCE, 115(1), 201–217.
18.
Soltis, L. A.(1984). “Seismic performance of low-rise light-framed wood buildings.”Shock and Vibration Digest, 16(11), 27–31.
19.
Stewart, W. G., Dean, J. A., and Carr, A. J. (1988). `The earthquake behavior of plywood sheathed shear walls.”Paper presented at The 1988 Int. Conf. on Timber Engrg., Seattle, Wash., Vol. 2, 248–261, Forest Products Res. Soc., Madison, Wis.
20.
Tarabia, A. (1994). “Response of light-frame buildings due to earthquake loadings,” PhD dissertation, Washington State University, College of Engineering, Pullman, Wash.
21.
Tarabia, A., and Itani, R.(1997). “Static and dynamic modeling of light-frame wood buildings.”Comp. and Struct., 63(2), 319–334.
22.
Uniform building code. (1991). International Conference of Building Officials, Pasadena, Calif.
23.
Yoon, T. Y., and Gupta, A. (1991). “Static and dynamic analysis of timber shear walls.” Final rep. Submitted to The National Science Foundation, Dept. of Civ. Envir. Engr., N.C. State Univ., Raleigh, N.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Nov 1, 1997
Published in print: Nov 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.