Behavior of RC Bridge Decks with Flexible Girders
Publication: Journal of Structural Engineering
Volume 122, Issue 1
Abstract
The current design practice for concrete bridge decks requires a top mat and a bottom mat of reinforcing bars. The chloride attack of the top mat of reinforcing bars is a major cause of deterioration of bridge decks. Empirical evidence has indicated that the top transverse reinforcing bars can essentially be eliminated without jeopardizing the structural integrity of a deck. To explore this issue, the behavior of a four-span highway bridge deck subjected to a test truck and normal traffic loads is being investigated. The behavior of the bridge deck under the test truck and various combinations of truck loads has been analyzed with the finite-element method. These results confirm the fact that a properly designed bridge deck does not require top transverse reinforcement for sustaining the negative bending moment induced by traffic loads.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, J. H. (1991). “Cracking, serviceability and strength of concrete bridge decks.”Proc., 3rd Bridge Engrg. Conf., Transp. Res. Rec. No. 1290, Transp. Res. Board, Nat. Res. Council, Washington, D.C., 152–171.
2.
Ballinger, C. A. (1971). “Cumulative fatigue damage characteristics of plain concrete.”Hwy. Res. Rec. No. 370, Hwy. Res. Board, Nat. Res. Council, Washington, D.C., 48–60.
3.
Beal, D. B.(1982). “Load capacity of concrete bridge decks.”J. Struct. Div., ASCE, 108(4), 814–832.
4.
“Building code requirements for reinforced concrete.” (1989). ACI 318-89, Am. Concrete Inst. (ACI), Detroit, Mich.
5.
Cao, L., Allen, J. H., and Shing, P. B. (1993). “A case study of elastic concrete deck behavior in a four-span prestressed girder bridge: Finite element analysis.”Res. Ser. No CU/SR-93/1, Dept. of Civ., Envir. and Arch. Engrg., Univ. of Colorado at Boulder, Colo. ( Rep. No. CDOT-DTD-CU-93-7, Colorado Dept. of Transp.).
6.
Cao, L., Allen, J. H., Shing, P. B., and Woodham, D. (1994). “A case study of concrete deck behavior in a four-span prestressed girder bridge: Correlation of field tests and numerical results.”Res. Ser. No. CU/SR-94/4, Dept. of Civ., Envir. and Arch. Engrg., Univ. of Colorado at Boulder, Colo. ( Rep. No. CDOT-CU-R-94-8, Colorado Dept. of Transp.).
7.
Fang, I. K., Worley, J. A., Burns, N. H., and Klingner, R. E.(1990). “Behavior of isotropic R/C bridge decks on steel girders.”J. Struct. Engrg., ASCE, 116(5), 659–678.
8.
Hsu, T. T. C. (1981). “Fatigue of plain concrete.”ACI J., (July–Aug.), 292–305.
9.
Lin, J. J.(1991). “Nonlinear analysis of composite bridges by the finite element method.”Comp. and Struct., 40(3), 1157–1167.
10.
Minutes of AASHTO bridge subcommittee. (1957–1961). Federal Hwy. Admin. Files, Am. Assoc. of State Hwy. and Transp. Officials (AASHTO), Washington, D.C.
11.
Mufti, A. A., et al. (1991). “Fiber reinforced concrete deck slabs without steel reinforcements.”Rep. No. 1-1991, Dept. of Civ. Engrg., Tech. Univ. of Nova Scotia, Halifax, Nova Scotia, Canada.
12.
Newmark, N. M.(1949). “Design of I-beam bridges.”Symp. of Hwy. Bridge Floors, ASCE Trans., 114, 979–1072.
13.
Oh, B. H.(1986). “Fatigue analysis of plain concrete in flexure.”J. Struct. Engrg., ASCE, 112(2), 273–288.
14.
Razaqpur, A. G., and Nofal, M.(1990). “Analytical modeling of nonlinear behavior of composite bridges.”J. Struct. Engrg., ASCE, 116(6), 1715–1733.
15.
Standard specifications for highway bridges. (1935). 2nd Ed., Am. Assoc. of State Hwy. and Transp. Officials (AASHTO), Washington, D.C.
16.
Standard specifications for highway bridges. (1992). 15th Ed., Am. Assoc. of State Hwy. and Transp. Officials (AASHTO), Washington, D.C.
17.
Tepfers, R., and Kutti, T. (1979). “Fatigue strength of plain, ordinary, and lightweight concrete.”ACI J., (May), 635–652.
18.
U.S. Department of Transportation. (1989). The status of the nation's highways and bridges: Conditions and performance—Highway bridge replacement and rehabilitation program . Federal Hwy. Admin., Washington, D.C.
19.
Westergaard, H. M. (1930). “Computations of stresses in bridge slabs due to wheel loads.”Public Roads, (Mar.), 1–23.
20.
Wilson, E. L., et al. (1989). SAP90 program user's manual . Computers & Structures, Inc., Berkeley, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jan 1, 1996
Published in print: Jan 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.