Safety Evaluation of Frames with PR Connections
Publication: Journal of Structural Engineering
Volume 121, Issue 7
Abstract
An efficient nonlinear stochastic finite-element method is proposed for the design of frame structures, specifically applicable to steel structures. The assumed stress-based finite-element method is used to compute nonlinear structural responses and the corresponding response gradients. Nonlinearities due to geometry, material, and partially restrained (PR) connections are considered in the algorithm. Elastoplastic material behavior is considered and the PR connections are modeled by the four-parameter Richard model. The material properties, geometry, connections parameters, and external loads are considered to be random variables. Both the strength and serviceability limit states are considered. The efficiency, robustness, desirability, and application potential of the method are demonstrated by two examples. Several observations with design implications can be made from these examples. Frames designed for strength may not be safe when serviceability is considered. The presence of PR connections makes the frame more flexible, and serviceability could become the governing limit state. It is essential to properly consider the PR connections in the analysis and design of frames, since design forces change significantly. In many cases, the member sizes may change considerably. The assumption that the connections are rigid, which is routinely used in the profession, is not appropriate. The proposed algorithm can be used as an alternative to the currently available methods to analyze and design frames, and to evaluate the corresponding reliabilities. The design is expected to be more efficient using this approach.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bucher, C. G., and Bourgund, U. (1987). “Efficient use of response surface methods.”Rep. No. 9-87, Institut fur Mechanik, Universitat Innsbruck, Innsbruck, Austria.
2.
Der Kiureghian, A., and Ke, J.-B. (1985). “Finite-element based reliability analysis of framed structures.”Proc., 4th Int. Conf. on Struct. Safety and Reliability (ICOSSAR), Int. Association for Struct. Safety and Reliability, Columbia Univ., New York, N.Y. 395–404.
3.
Der Kiureghian, A., and Ke, J.-B. (1988). `'The stochastic finite element method in structural reliability.”Probabilistic Engrg. Mech., 3(2), 83–91.
4.
Der Kiureghian, A., Lin, H.-Z., and Hwang, S.-J.(1987). “Second-order reliability approximations.”J. Engrg. Mech., ASCE, 113(8), 1208–1225.
5.
Frye, M. J., and Morris, G. A.(1975). “Analysis of flexibly connected steel frames.”Can. J. Civ. Engrg., Ottawa, Canada, 2(3), 280–291.
6.
Gao, L., and Haldar, A. (1993a). “Reliability analysis for nonlinear structures.”Proc., ISUMA '93, 2nd Int. Symp. on Uncertainty Modeling and Analy., Inst. of Electr. and Electronics Engrs., Inc., Los Alamitos, Calif., 587–594.
7.
Gao, L., and Haldar, A. (1993b). “Nonlinear SFEM-based reliability for space structures.”Proc., ICOSSAR '93, 6th Int. Conf. on Struct. Safety and Reliability, A. A. Balkema, Rotterdam, The Netherlands, Vol. 1, 325–332.
8.
Ghanem, R. G., and Spanos, P. (1989). “Galerkin-based response surface approach for reliability analysis.”Proc., 5th Int. Conf. on Struct. Safety and Reliability, ASCE, New York, N.Y., Vol. 2, 1081–1088.
9.
Haldar, A., and Nee, K. M.(1989). “Elasto-plastic large deformation analysis of PR steel frames for LRFD.”Computer. Struct., 34(5), 811–823.
10.
Hisada, T., and Nakagiri, S. (1985). “Role of the stochastic finite element method in structural safety and reliability.”Proc., 4th Int. Conf. on Struct. Safety and Reliability (ICOSSAR), Int. Association for Struct. Safety and Reliability, Columbia Univ., New York, N.Y., Vol. 1, 385–396.
11.
Jones, S. W., Kirby, P. A., and Nethercot, D. A.(1980). “Effect of semi-rigid connections on steel column strength.”J. Constr. Steel Res., 1(1), 38–46.
12.
Kondoh, K., and Atluri, S. N.(1987). “Large deformation, elasto-plastic analysis of frames under non-conservative loading, using explicitly derived tangent stiffness based on assumed stress.”Computer. Mech., 2(1), 1–25.
13.
Lawrence, M. A.(1987). “Basis random variables in finite element analysis.”Int. J. for Numerical Methods in Engrg., 24(10), 1849–1863.
14.
Liu, W. K., Belytschko, T., and Mani, A. (1986). “Probabilistic finite element for nonlinear structural dynamics.”Computer. Methods in Appl. Mech. and Engrg., Vol. 56, 61–86.
15.
Liu, P-L., and Der Kiureghian, A. (1985). “Optimization algorithms for structural reliability analysis.”Res. Rep. No. UCB/SESM-86/09, Dept. of Civ. Engrg., Univ. of California, Berkeley, Calif.
16.
Loeve, M. (1977). Probability theory, 4th Ed., Springer-Verlag, New York, N.Y.
17.
Lui, E. M. (1985). “Effects of connection flexibility and panel zone deformation on the behavior of plane steel frames,” PhD thesis, Purdue Univ., Lafayette, Ind.
18.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). Method of structural safety. Prentice-Hall Inc., Englewood Cliffs, N.J.
19.
Mahadevan, S., and Haldar, A.(1989). “Efficient algorithm for stochastic structural optimization.”J. Struct. Engrg., ASCE, 115(7), 1579–1598.
20.
Mahadevan, S., and Haldar, A.(1991). “Stochastic FEM-based evaluation of LRFD.”J. Struct. Engrg., ASCE, 117(5), 1393–1412.
21.
Rackwitz, R., and Fiessler, B.(1978). “Structural reliability under combined load sequences.”Computers and Struct., 9(5), 489–494.
22.
Rauscher, T. R., and Gerstle, K. H.(1992). “Reliability of rotational behavior of framing connections.”Engrg. J., 29(1), 12–19.
23.
Razzaq, Z.(1983). “End restraint effect on steel column strength.”J. Struct. Engrg., ASCE, 109(2), 314–334.
24.
Richard, R. M., and Abbott, B. J.(1975). “Versatile elastic-plastic stress-strain formula.”J. Engrg. Mech., ASCE, 101(4), 511–515.
25.
Ryu, Y. S., Harian, M., Wu, C. C., and Arora, J. S.(1985). “Structural design sensitivity analysis of nonlinear response.”Computer. Struct., 21(1/2), 245–255.
26.
Schuëller, G. I., and Stix, R.(1987). “A critical appraisal of methods to determine failure probabilities.”Struct. Safety, 4(4), 293–309.
27.
Shi, G., and Atluri, S. N.(1988). “Elasto-plastic large deformation analysis of space—frames.”Int. J. Numerical Methods in Engrg., 26(3), 589–615.
28.
Shinozuka, M., and Nomoto, T. (1981). “Response variability due to spatial randomness of material properties.”Tech. Rep., Dept. of Civ. Engrg., Columbia Univ., New York, N.Y.
29.
Uniform building code. (1991). International Conference on Building Officials, Whittier, Calif.
30.
Wu, Y-T., and Wirsching, P.(1987). “New algorithm for structural reliability estimation.”J. Engrg. Mech., ASCE, 113(4), 536–553.
31.
Yamazake, F., Shinozuka, M., and Dasgupta, G.(1988). “Newmann expansion for stochastic finite element analysis.”J. Engrg. Mech., ASCE, 114(8), 1335–1354.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 121 • Issue 7 • July 1995
Pages: 1101 - 1109
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Jul 1, 1995
Published in print: Jul 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.