Behavior of Three-Span Braced Columns with Equal or Unequal Spans
Publication: Journal of Structural Engineering
Volume 121, Issue 6
Abstract
The behavior of uniform, elastic, braced columns with three spans is investigated. The spans may have equal or unequal lengths. The base of the column is pinned and the top is either pinned or flexibly supported. The braces are represented by elastic translational springs, and a compressive axial load is applied to the column. For perfect columns, critical loads and buckling modes are determined. Full bracing is possible if the spans are equal. For imperfect columns with an initial deflection, additional deflections and bracing forces are obtained, and the effects of the stiffnesses and locations of the braces are examined. Examples of design curves for required bracing stiffness and strength are presented. Extensions involving nonuniform loading and cross section, unequal bracing stiffnesses, and rotational resistance at the braces are also discussed. General conditions are derived for full bracing of columns with an arbitrary number of equal or unequal spans and braces, and with uniform or piecewise-constant loading and cross section. The corresponding critical loads are found, and equations and simple bounds for ideal bracing stiffnesses are given.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Beliveau, J.-G., and Zhang, H.-Y. (1991). “Minimum required lateral stiffness of structures.”Mechanics computing in 1990's and beyond, Vol. 1, H. Adeli and R. L. Sierakowski, eds., ASCE, New York, N.Y., 223–227.
2.
Galambos, T. V., ed., (1988). Guide to stability design criteria for metal structures. 4th Ed., John Wiley, New York, N.Y.
3.
Lutz, L. A., and Fisher, J. M.(1985). “A unified approach for stability bracing requirements.”Engrg. J., Am. Inst. of Steel Constr., 22(4), 163–167.
4.
McGuire, W. (1968). Steel structures . Prentice-Hall, Englewood Cliffs, N.J.
5.
Medland, I. C.(1977). “A basis for the design of column bracing.”Struct. Engr., 55(7), 301–307.
6.
Nair, R. S.(1992). “Forces on bracing systems.”Engrg. J., Am. Inst. of Steel Constr., 29(1), 45–47.
7.
O'Connor, C. (1979). “Imperfectly braced columns and beams.”Civ. Engrg. Trans., Inst. Engrs., Australia, CE21(2), 69–74.
8.
Olhoff, N., and Åkesson, B.(1991). “Minimum stiffness of optimally located supports for maximum value of column buckling loads.”Struct. Optimization, 3(3), 163–175.
9.
Plaut, R. H.(1993). “Requirements for lateral bracing of columns with two spans.”J. Struct. Engrg., ASCE, 119(10), 2913–2931.
10.
Plaut, R. H., and Yang, J.-G.(1993). “Lateral bracing forces in columns with two unequal spans.”J. Struct. Engrg., ASCE, 119(10), 2896–2912.
11.
Rutenberg, A., and Scarlat, A.(1990). “Roof bracing and effective length of columns in one-story industrial buildings.”J. Struct. Engrg., ASCE, 116(10), 2551–2566.
12.
Salmon, C. G., and Johnson, J. E. (1990). Steel structures: Design and behavior . 3rd Ed., Harper & Row, New York, N.Y.
13.
Smith, G. D. (1985). Numerical solution of partial differential equations: Finite difference methods . 3rd Ed., Clarendon Press, Oxford, U.K.
14.
Stanway, G. S., Chapman, J. C., and Dowling, P. J.(1992). “A simply supported imperfect column with a transverse elastic restraint at any position. Part 2: Design models.”Proc., Institution of Civil Engineers, Structures and Buildings, London, England, 94(2), 217–228.
15.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability . 2d Ed., McGraw-Hill, New York, N.Y.
16.
Trahair, N. S., and Nethercot, D. A. (1984). “Bracing requirements in thin-walled structures.”Developments in thin-walled structures—2, J. Rhodes and A. C. Walker, eds., Elsevier, London, 93–130.
17.
Urdal, T. B.(1969). “Bracing of continuous columns.”Engrg. J., Am. Inst. Steel Constr., 6(3), 80–83.
18.
Winter, G.(1960). “Lateral bracing of columns and beams.”Trans., ASCE, 125(1), 807–845.
19.
Yang, Y.-W. (1993). “Behavior of three-span braced columns with equal and unequal spans,” MS thesis, Virginia Polytechnic Institute and State University, Blacksburg, Va.
20.
Zhang, H.-Y., Beliveau, J.-G., and Huston, D. R.(1993). “Minimum lateral stiffness for equally spaced braces in columns.”J. Engrg. Mech., ASCE, 119(9), 1888–1897.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Jun 1, 1995
Published in print: Jun 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.