Analytical Model for Shear Critical Reinforced-Concrete Members
Publication: Journal of Structural Engineering
Volume 121, Issue 6
Abstract
In this investigation, a nonlinear finite-element model is developed for predicting the complete load-deflection response of shear critical reinforced-concrete members. The nonlinear finite-element model employs a biaxial stress-strain constitutive relationship of concrete based on an equivalent uniaxial approach developed in this study and a simplified bilinear stress-strain relationship of reinforcing steel. The main feature of the model is its ability to predict the postpeak load-deflection response of shear critical reinforced-concrete members failing under a diagonal tension. The computational procedure developed in this study employs the secant-stiffness method and a noniterative algorithm. The predictions of the analytical model are compared with the available experimental data and the comparisons are judged to be good.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahmad, S. H., and Shah, S. P. (1979). “Complete stress-strain curve of concrete and nonlinear design.”Nonlinear Design of Concrete Structures: CSCS-ASCE-ACI-CEB Int. Symp., Univ. of Waterloo Press, Ontario, Canada, 61–81.
2.
Ahmad, S. H., Shah, S. P., and Khaloo, A. R.(1986). “Orthotropic model of concrete for triaxial stresses.”J. Struct. Engrg., ASCE, 112(1), 165–181.
3.
Bresler, B., and Scordelis, A. C.(1963). “Shear strength of reinforced concrete beams.”ACI J., 60(1), 51–74.
4.
Chung, W. (1992). “Analytical model for diagonal tension failure of reinforced concrete members under static loads,” PhD thesis, North Carolina State Univ., Raleigh, N.C.
5.
Dodds, R. H., Darwin, D. M., and Leibengood, L. D.(1984). “Stress controlled smeared cracking in R/C beams.”J. Struct. Engrg., ASCE, 110(9), 1959–1976.
6.
Finite element analysis of reinforced concrete. (1982). ASCE, New York, N.Y.
7.
Gopalaratnam, V. S., and Shah, S. P.(1985). “Softening response of plain concrete in direct tension.”ACI J., 82(3), 310–323.
8.
Gupta, A. K., and Maestrini, S. R.(1989). “Post-cracking behavior of membrane reinforced concrete elements including tension-stiffening.”J. Struct. Engrg., ASCE, 115(4), 957–976.
9.
Hsu, T. T. C.(1988). “Softened truss model theory for shear and torsion.”ACI Struct. J., 85(6), 624–634.
10.
Kupfer, H. B., and Hilsdorf, H. K.(1969). “Behavior of concrete under biaxial stresses.”ACI J., 66(8), 656–666.
11.
Kotsovos, M. D.(1984). “Behavior of reinforced concrete beams with a shear span to depth ratio between 1.0 and 2.5.”ACI J., 81(3), 279–286.
12.
Kotsovos, M. D.(1988). “Compressive force path concept basis for reinforced concrete ultimate limit state design.”ACI Struct. J., 85(1), 68–75.
13.
Leonhardt, F., and Walther, R. (1966). “Wandartige Träger.”Bull. No. 178, Deutscher Ausschuss für Stahlbeton, Berlin, Germany (in German).
14.
Liu, T. C. Y., Nilson, A. H., and Slate, F. O.(1972). “Biaxial stress-strain relations for concrete.”J. Struct. Div., ASCE, 98(5), 1025–1034.
15.
Pramono, E. (1988). “Numerical simulation of distributed and localized failure in concrete,” PhD thesis, Dept. of Civ., Envir., and Arch. Engrg., Univ. of Colorado, Boulder, Colo.
16.
Schlaich, J., Schafer, K., and Jennewein, M.(1987). “Toward a consistent design of structural concrete.”PCI J., 32(3), 74–150.
17.
Stevens, N. J., Uzumeri, S. M., Collins, M. P., and Will, G. T.(1991). “Constitutive model for reinforced concrete finite element analysis.”ACI Struct. J., 88(1), 49–59.
18.
Tasuji, M. E., Slate, F. O., and Nilson, A. H.(1978). “Stress-strain response and fracture of concrete in biaxial loading.”ACI J., 75(7), 306–312.
19.
Vecchio, F. J., and Collins, M. P.(1986). “The modified compression-field theory for reinforced concrete elements subjected to shear.”ACI Struct. J., 83(3), 219–231.
20.
Vecchio, F. J.(1990). “Reinforced concrete membrane element formulations.”J. Struct. Engrg., ASCE, 116(3), 730–750.
21.
Weaver, W. Jr., and Johnston, P. R. (1984). Finite elements for structural analysis, Prentice-Hall, Inc., Englewood Cliffs, N.J.
22.
Xie, Y., Hino, S., and Chung, W. (1992). “Testing facility for controlled diagonal tension of shear critical reinforced concrete beams.”Res. Rep., Dept. of Civ. Engrg., North Carolina State Univ., Raleigh, N.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Jun 1, 1995
Published in print: Jun 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.