New Analysis for Creep Behavior in Concrete Columns
Publication: Journal of Structural Engineering
Volume 121, Issue 3
Abstract
This paper presents a new rational approach for the evaluation of the effects of creep on reinforced-concrete axially loaded columns at sustained service stresses. The analysis involves a straightforward computation based on a closed form procedure and the assumption of linear elastic materials for both concrete and steel. The analysis may be easily extended to cover the case of reinforcement at yield. The results of the proposed approach may be superposed with those from a shrinkage model presented by Park and Paulay in 1975, and the overall behavior of column axial shortening and stress transfer from concrete to steel may be described using the combined approach. The process involved is very convenient to use from an engineering viewpoint since it requires few input parameters, which are easy to estimate or measure experimentally, such as the modulus of elasticity of concrete and the creep coefficient. The results of the theoretical approach correlate well with experimental tests conducted on specimens in the laboratory, and with deformations of columns measured in the Water Tower Place and Lake Point Tower, in Chicago.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bazant, Z. P.(1972). “Prediction of concrete creep effects using age-adjusted effective modulus method.”J. Am. Concrete Inst., 69(4), 212–217.
2.
Building code requirements for reinforced concrete (ACI 318M-89) and commentary (ACI 318RM-89). (1989). Am. Conc. Inst. (ACI), Detroit, Mich.
3.
“CEB-FIP; model code for concrete structures.” (1984). International system of unified codes of practice for structures, Vol. I and II, Comite Euro-International du beton.
4.
Espion, B., and Halleux, P.(1990). “Long-term deflections of reinforced concrete beams: reconsideration of their variability.”J. Am. Concrete Inst., 87(2), 232–236.
5.
Liu, X. L., and Chen, W. F.(1987). “Effect of creep on load distribution in multistory reinforced concrete buildings during construction.”J. Am. Concrete Inst., 84(3), 192–200.
6.
Manuel, R. F. (1966). “The behavior of restrained reinforced concrete columns under sustained load,” PhD dissertation, Univ. of Alberta, Edmonton, Canada.
7.
McHenry, D. (1943). “A new aspect of creep in concrete and its application to design.”Proc., ASTM, 43, ASTM, Philadelphia, Pa., 1069–1084.
8.
Park, R., and Paulay, T. (1975). Reinforced concrete structures . John Wiley and Sons, New York, N.Y., 457–461.
9.
Pfeifer, D. W., Magura, D. D., Russel, H. G., and Corley, W. G. (1971). “Time-dependent deformations in a 70-story structure; designing for effect of creep, shrinkage and temperature in concrete structures.” ACI SP27-7, Am. Concrete Inst. (ACI), Detroit, Mich., 159–185.
10.
Russel, H. G., and Corley, W. G. (1978). “Time-dependent behavior of columns in Water Tower Place.”Rep., Portland Cement Association, Skokie, Ill.
11.
Samra, R. M.(1989). “Creep model for reinforced concrete columns.”J. Am. Concrete Inst., 86(1), 77–82.
12.
Troxell, G. E., Raphael, J. M., and Davis, R. E. (1958). Long-time creep and shrinkage tests of plain and reinforced concrete.”Proc., ASTM, (58), ASTM, Philadelphia, Pa., 1102–1120.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Mar 1, 1995
Published in print: Mar 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.