Reliability of Reinforced-Concrete Cylindrical Shells
Publication: Journal of Structural Engineering
Volume 121, Issue 2
Abstract
Reinforced concrete shells are structurally complex and closed-form models for their various limit states of serviceability and strength either are not available or may be based on approximations and idealizations of behavior. Nonlinear finite-element techniques have made it possible to account for the complexities of reinforced concrete behavior in the inelastic range, to identify these limit states more accurately, and to assess the safety and reliability of concrete shells. Traditional reliability analysis methods are more convenient to apply when closed-form mechanical models of limit states are available. In the absence of such models, the reliability analysis can be performed by response surface methods that approximate the limit states by polynomial surfaces obtained through finite-element analyses of the system at a set of predetermined experimental points. This paper presents the reliability analysis of a reinforced concrete containment structure by the response surface method. Axisymmetric nonlinear finite-element analyses were performed to define the limit surfaces and importance sampling was used for the calculation of limit state probabilities.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abbasi, M. S. A., Baluch, M. H., Azad, A. K., and Rahman, H. H. A.(1992). “Non-linear finite element modeling of failure modes in RC slabs.”Comp. and Struct., 42(5), 815–823.
2.
Ahmad, S., Irons, B. M., and Zienkiewicz, O. C. (1970). “Analysis of thick and thin shell structures by curved finite elements.”Int. J. Numer. Meth. Engrg., Vol. 2, 419–451.
3.
“Code for concrete reactor vessels and containments.” (1992). ASME boiler and pressure vessel code; ANSI/ASME BPV-III-2 (ACI 359-74), Section III, rules for construction of nuclear power plant components, division 2 . ASME, New York, N.Y.
4.
Bucher, C. G., and Bourgund, U. (1990). “A fast and efficient response surface approach for structural reliability problems.”Structural Safety, Vol. 7, 57–66.
5.
Ellingwood, B.(1982). “Safety checking formats for limit state design.”J. Struct. Div., ASCE, 108(7), 1481–1493.
6.
Faravelli, L. (1991). “Structural reliability via response surface.”Proc., IUTAM Symp. on Nonlinear Stochastic Mech., Springer-Verlag, Berlin, Germany, 213–233.
7.
Gerstle, K. H. (1981). “Material modeling of reinforced concrete.”Introductory Rep., IABSE Colloquium on Advanced Mech. of Reinforced Concrete. IABSE, Delft, The Netherlands, Vol. 33, 41–63.
8.
Gilbert, R. I., and Warner, R. F.(1978). “Tension stiffening in reinforced concrete slabs.”J. Struct. Div., ASCE, 104(12), 1885–1900.
9.
Gupta, A. K.(1990). “Tension stiffness model for reinforced concrete bars.”J. Struct. Engrg., ASCE, 116(3), 769–790.
10.
Hand, F. R., Pecknold, D. A., and Schnobrich, W. C.(1973). “Nonlinear layered analysis of RC plates and shells.”J. Struct. Div., ASCE, 99(7), 1491–1505.
11.
Hwang, H., Ellingwood, B., Shinozuka, M., and Reich, M.(1987). “Probability-based design criteria for nuclear plant structures.”J. Struct. Engrg., ASCE, 113(5), 925–942.
12.
Jofriet, J. C., and McNeice, G. M.(1971). “Finite element analysis of reinforced concrete slabs.”J. Struct. Div., ASCE, 97(3), 785–806.
13.
Kupfer, H., and Gerstle, K. H. (1973). “Behavior of concrete under biaxial stresses.”J. Engrg. Mech. Div., ASCE, 99(4), 853–866.
14.
Kupfer, H., Hilsdorf, K. H., and Rush, I. I.(1969). “Behavior of concrete under biaxial stresses.”Am. Concrete Inst. J., 66(8), 656–666.
15.
Lin, C. S., and Scordelis, A. C.(1975). “Nonlinear analysis of RC shells of general form.”J. Struct. Div., ASCE, 101(3), 523–538.
16.
MacGregor, J. G., Mirza, S. A., and Ellingwood, B.(1983). “Statistical analysis of resistance of reinforced and prestressed concrete members.”Am. Concrete Inst. J., 80(3), 167–176.
17.
Melchers, R. E. (1987). Structural reliability: analysis and prediction . Ellis Horwood, Chichester, U.K.
18.
Melchers, R. E. (1989). “Importance sampling in structural systems.”Struct. Safety, Vol. 6, 3–10.
19.
Mirza, S. A., Hatzinikolas, M., and MacGregor, J. G.(1979). “Statistical descriptions of strength of concrete.”J. Struct. Div., ASCE, 105(6), 1021–1037.
20.
Ngo, D., and Scordelis, A. C.(1967). “Finite element analysis of reinforced concrete beams.”Am. Concrete Inst. J., 64(3), 152–163.
21.
Owen, D. R. J., Figueiras, J. A., and Damjanic, F. (1983). “Finite element analysis of reinforced and prestressed concrete structures including thermal loading.”Comp. Meth. App. Mech. and Engrg., Vol. 41, 323–366.
22.
Owen, D. R. J., and Figueiras, J. A. (1984). “Ultimate load analysis of reinforced concrete plates and shells including geometric nonlinear effects.”Finite element software for plates and shells, E. Hinton, and D. R. J. Owen, eds., Pineridge Press, Swansea, Wales, 327–388.
23.
Rajashekhar, M. R., and Ellingwood, B. R.(1993). “A new look at the response surface method of reliability analysis.”Struct. Safety, 12(4), 205–220.
24.
Scanlon, A., and Murray, D. W.(1974). “Time dependent reinforced concrete slab deflections.”J. Struct. Div., ASCE, 100(9), 1911–1924.
25.
Schuëller, G. I., and Stix, R.(1987). “A critical appraisal of methods to determine failure probabilities.”Struct. Safety, 4(4), 293–309.
26.
Somayaji, S., and Shah, S. P.(1981). “Bond stress versus slip relationship and cracking response of tension members.”Amer. Concrete Inst. J., 78(3), 217–225.
27.
Walther, H. P. (1992). “Evaluation of behavior and the radial shear strength of a reinforced concrete containment structure.”NUREG/CR-5674, SAND91-7058, Sandia National Laboratories, N.M.
28.
Zienkiewicz, O. C., and Taylor, R. L. (1989). The finite element method; vol. 2; solid and fluid mechanics, dynamics and nonlinearity. McGraw-Hill Book Co. (UK) Ltd., England.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Feb 1, 1995
Published in print: Feb 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.