Design of Steel Beams in Cantilever-Suspended-Span Construction
Publication: Journal of Structural Engineering
Volume 121, Issue 11
Abstract
In cantilever-suspended-span construction, secondary framing members such as open-web steel joists are likely to enhance markedly the stability of the beams that support them. Properly made joist-beam connections enable the joists to provide both lateral and torsional restraints to the beam top flange at discrete locations. This restraint, in turn, is transmitted through the web to the bottom flange of the beam, which is in compression in negative moment regions. Therefore, the buckling modes are generally characterized by the occurrence of web distortion. Current design procedures for this very common form of construction are inadequate as they do not consider web distortion and the beneficial effect of torsional restraint. They may also neglect the detrimental effect of the height of load application above the shear center. This results in an inaccurate assessment of the lateral-torsional buckling resistance. A finite-element model, corroborated by tests, is used to develop a simplified design procedure for these beams.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albert, C., Essa, H. S., and Kennedy, D. J. L.(1992). “Distortional buckling of steel beams in cantilever-suspended span construction.”Can. J. Civ. Engrg., Ottawa, Canada, 19(5), 767–780.
2.
Associate Committee on the National Building Code (ACNBC). (1990). National building code of Canada . Nat. Res. Council of Canada, Ottawa, Canada.
3.
Canadian Institute of Steel Construction. (1989). Roof framing with cantilever (Gerber) girders & open web steel joists . Willowdale, Ont., Canada.
4.
Canadian Standards Association (CSA). (1994). “Limit states design of steel structures.”Nat. Standard of Canada CAN/CSA-S16.1-94. Rexdale, Ont., Canada.
5.
Essa, H. S., and Kennedy, D. J. L. (1993a). “Distortional buckling of steel beams.”Struct. Engrg. Rep. 185, Dept. of Civil Engineering, University of Alberta, Edmonton, Al., Canada.
6.
Essa, H. S., and Kennedy, D. J. L. (1993b). “Bracing in cantilever-suspended span construction.”Proc., Struct. Stability Res. Council Conf., Struct. Stability Res. Council, Lehigh Univ., Bethlehem, Pa.
7.
Essa, H. S., and Kennedy, D. J. L. (1993c). “Design of restrained beams against lateral-torsional buckling.”Proc., 1993 Annu. Conf., Can. Soc. for Civ. Engrg., Montreal, Canada, II, 305–314.
8.
Galambos, T. V., and Ravindra, M. K. (1973). “Tentative load and resistance factor design criteria for steel buildings.”Res. Rep. No. 18, Civ. Engrg. Dept., Washington Univ., St Louis, Mo.
9.
Kirby, P. A., and Nethercot, D. A. (1979). “Design for structural stability.”Constrado Nomographs, Granada Publishing, London, England.
10.
Lindner, J.(1972). “Gebundene Kippung beim Einfeldtrager mit Kragarm.”Der Stahlbau, Berlin, Germany, 41(7), 216–218.
11.
Lindner, J.(1987). “Stabilisierung von Tragern durch Trapezbleche.”Der Stahlbau, Berlin, Germany, 55(1), 9–15.
12.
Mehta, P. B.(1981). “A graphical method for design of cantilevered and suspended beams.”Engrg. J., 18(2), 54–57.
13.
Milner, H. R. (1977). “The design of simple supported beams braced against twisting on the tension flange.”Civ. Engrg. Trans., Canberra, Australia, CE19(1), 84–91.
14.
Milner, H. R., and Rao, S. N. (1978). “Strength and stiffness of moment resisting beam-purlin connections.”Civ. Engrg. Trans., Canberra, Australia, CE20(1), 37–42.
15.
Svensson, S. E.(1985). “Lateral buckling of beams analysed as elastically supported columns subject to a varying axial force.”J. Constructional Steel Res., 5, 179–193.
16.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw-Hill, New York, N.Y.
17.
White, R. N., and Salmon, C. G. (1987). Building structural design handbook . John Wiley & Sons, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Nov 1, 1995
Published in print: Nov 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.