Guidelines for Design of Joints between Steel Beams and Reinforced Concrete Columns
Publication: Journal of Structural Engineering
Volume 120, Issue 8
Abstract
Guidelines are presented for the design of beam‐column moment‐resisting joints in composite framed structures consisting of structural steel beams and reinforced concrete or composite columns. These recommendations address the proportioning and detailing of these joints, taking into account the interaction of the structural steel and reinforced concrete components. The recommendations are based primarily on tests of cruciform‐shaped specimens and on related information from existing codes and standards. The typical joint configuration is one where the steel beams are continuous through the reinforced concrete column. Such connections are increasingly being used in the United States, Japan, and elsewhere. Since many of the concepts are being introduced for the first time, a commentary is provided that identifies additional reference material. Examples are included to demonstrate the use of these design recommendations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI Committee 318. (1989). “Building code requirements for reinforced concrete.” Report No. ACI 318‐89. American Concrete Institute, Detroit, Mich.
2.
ACI‐ASCE Committee 352. (1985). “Recommendations for design of beam column joints in monolithic reinforced concrete structures.” J. Am. Concr. Inst., 82(3), 266–283.
3.
Building Seismic Safety Council. (1991). “NEHRP recommended provisions for the development of seismic regulations for new buildings.” Report No. FEMA 222, Federal Emergency Management Agency, Washington, D.C.
4.
Deierlein, G. G., Sheikh, T. M., Yura, J. A., and Jirsa, J. O. (1989). “Beam‐column moment connections for composite frames: Part 2.” J. Struct. Engrg., ASCE, 115(11), 2877–2896.
5.
Deierlein, G. G., Yura, J. A., and Jirsa, J. O. (1988). “Design of moment connections for composite framed structures.” PFMSEL Report No. 88‐1, Univ. of Texas at Austin, Austin, Tex.
6.
Griffis, L. (1986). “Some design considerations for composite‐frame structures.” AISC Engrg. J., 23(2), 59–64.
7.
Iyengar, H. (1985). “Recent developments in mixed steel‐concrete systems.” Composite and mixed construction. C. Roeder, ed., ASCE, New York, N.Y., 173–184.
8.
“Load and resistance factor design specification for structural steel buildings.” (1993). American Institute of Steel Construction, Chicago, Ill.
9.
Lu, L., and Kato, B. (1985). “Seminar summary and research needs.” Composite and mixed construction. C. Roeder, ed., ASCE, New York, N.Y., 323–329.
10.
Marcakis, K., and Mitchell, D. (1980). “Precast concrete connections with embedded steel members.” PCI J., 26(4), 88–116.
11.
Minami, K. (1985). “Beam to column stress transfer in composite structures.” Composite and mixed construction. C. Roeder, ed., ASCE, New York, N.Y., 215–226.
12.
“Minimum design loads for buildings and other structures.” (1993). Report No. ASCE 7‐93, ASCE, New York, N.Y.
13.
Moore, W., and Gosain, N. (1985). “Mixed systems: Past practices, recent experience and future direction.” Composite and mixed construction, C. Roeder, ed., ASCE, New York, N.Y., 138–149.
14.
Nishimura, Y., and Minami, K. (1990). “Stress transfer from steel beams to reinforced concrete columns.” IABSE Symp. Proc.: Mixed Structures Including New Materials, IABSE, Zurich, Switzerland, 389–394.
15.
Nishimura, Y., Minami, K., and Yakabayashi, M. (1986). “Shear strength of steel reinforced concrete beam‐column joint.” J. Struct. Constr. Engrg., 365, 87–97 (in Japanese).
16.
Nishiyama, I., Hasegawa, T., and Yamanouchi, H. (1990). “Strength and deformation capacity of reinforced concrete column to steel beam joint panels.” Kenchiku Kenkyo‐Shiro, No. 71, Sept., Building Res. Inst., Ministry of Construction, Japan.
17.
Ogura, K., Tanaka, R., and Noguchi, H. (1990). “Development of mixed structures in Japan.” IABSE Symp. Proc.: Mixed Structures Including New Materials, Zurich, Switzerland, 437–442.
18.
Park, R., and Paulay, T. (1975). Reinforced concrete structures. John Wiley and Sons, New York, N.Y., 726–742.
19.
Sheikh, T. M., Deierlein, G. G., Yura, J. A., and Jirsa, J. O. (1989). “Beam‐column moment connections for composite frames: Part 1.” J. Struct. Engrg., ASCE, 115(11), 2858–2876.
20.
Sheikh, T. M., Yura, J. A., and Jirsa, J. O. (1987). “Moment connections between steel beams and concrete columns.” PMFSEL Report No. 87‐4, University of Texas, Austin, Tex.
21.
Wakabayashi, M. (1988). “A historical study of research on composite construction in Japan.” Composite construction in steel and concrete, C. D. Buckner and I. M. Viest, eds., ASCE, New York, N.Y., 400–427.
22.
Yoshino, T., Kanoh, Y., Mikame, A., and Saski, H. (1990). “Mixed structural systems of precast concrete columns and steel beams. IABSE Symp. Proc.: Mixed Structures Including New Materials, International Association for Bridge and Structural Engineering, Zurich, Switzerland, 401–406.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Nov 22, 1993
Published online: Aug 1, 1994
Published in print: Aug 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.