Fire Resistance of Fire‐Resistant Steel Columns
Publication: Journal of Structural Engineering
Volume 120, Issue 4
Abstract
This paper is to verify the fire resistance of columns made from fire‐resistant (FR) structural steel by means of a full‐scale loaded heat test and numerical analysis. Because of the elements contained, FR steel has higher strength than conventional structural steel at elevated temperatures. Its 0.2% proof stress at 600°C is equal to or greater than two‐thirds the value specified at room temperature. Rock wool, ceramic fire protection, and foaming‐type intumescent coating were used as fire‐protection materials. Using Japanese codes, the high‐temperature strength of steel can be exhibited with building members, the fire‐protection thickness can be reduced below what is required for conventional steel columns, and 1‐h fire resistance can be obtained by intumescent coating with a lower insulation property. Also, deformation and fire‐resistance time can be simulated from the mechanical properties at elevated temperatures and elastoplastic thermal deformation analysis. Furthermore, this study is based on Japanese codes, and results will differ if based on ASTM codes.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Building standard law of Japan. (1990). Building Center of Japan, Tokyo, Japan.
2.
Keira, K., Sakumoto, Y., and Yamaguchi, T. (1990). “Studies of structural steels with excellent mechanical properties at elevated temperature. Part 3. Comparison between fire tests and simulation.” Summaries of Tech. Papers of Annual Meeting, Architectural Institute of Japan, Tokyo, Japan, 1035–1036.
3.
“Method of fire resistance test for structural parts of buildings.” (1975). Japanese Industrial Standards Handbook, JIS A 1304, Japanese Standards Assoc., Tokyo, Japan, 335–339.
4.
“Method of high temperature tensile tests for steels and heat‐resisting alloys.” (1978). Japanese Industrial Standards Handbook, JIS G 0567, Japanese Standards Assoc., Tokyo, Japan, 392–395.
5.
Migita, K., Okabe, T., Furumura, F., Ave, T., and Kim, W. J. (1988). “Elastoplastic creep thermal deformation behavior of multi‐story steel frames designed by the plastic method.” Fire Safety Sci. Proc. 2nd Int. Symp., International Association for Fire Safety, Gaithersburg, Md., 739–748.
6.
Saito, H. (1968). “Research on the fire resistance of steel beams.” BRI Research Paper No. 31, Building Research Institute, Tokyo, Japan, 1–24.
7.
Sakumoto, Y., Yamaguchi, T., Ohashi, M., and Saito, H. (1992). “High‐temperature properties of fire‐resistant steel for buildings.” J. Struct. Engrg., ASCE, 118(2), 392–407.
8.
Specifications for the design, fabrication & erection of steel structures for buildings. (1986). Society of Steel Construction of Japan, Architectural Institute of Japan, Tokyo, Japan, 1–123.
9.
“Standard methods of fire tests of building construction and materials.” (1983). E119‐83, ASTM, Philadelphia, Pa., 190–196.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Feb 24, 1992
Published online: Apr 1, 1994
Published in print: Apr 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.