Finite Element Modeling of Continuous Posttensioned Voided Slab Bridges
Publication: Journal of Structural Engineering
Volume 120, Issue 2
Abstract
Two quarter‐scale, continuous, longitudinally and transversely posttensioned, two‐lane, voided‐slab‐bridge models—one straight and the other curved in plan—were tested to determine the service‐load response under symmetric placement of simulated truck loading according to the American Association of State Highway and Transportation Officials. Each model was 2.0 m (6 ft 7 in.) wide, with two equal spans of 8.0 m (26.27 ft) measured along the centerline. The curved model subtended an arc of 40° on a radius of curvature of 22.92 m (75.2 ft). The voided slab bridge was idealized as an orthotropic plate and its elastic response determined from a two‐dimensional finite element analysis using isoparametric, quadrilateral shell elements. The commercially available computer program ANSYS was used to conduct the analysis. This paper presents comparisons of predictions from the finite element analysis with test results for deflections, reactions, and stresses. The results show reasonable agreement for the straight model but not for the curved model, where the correlation is poorer. This suggests that the equivalent orthotropic plate parameters proposed in the literature need to be modified for applications involving curved structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aster, H. (1968). “Zur Berechnung rechteckiger, vierseitig gelagerter Stahl betonhohlplatten,” PhD thesis, University of Stuttgart, Stuttgart, West Germany.
2.
Bakht, B., Jaeger, L., Cheung, M. S., and Mufti, A. A. (1981). “The state of the art in analysis of cellular and voided slab bridges.” Can. J. Civ. Engrg., 8(3), 376–391.
3.
Bakht, B., Jaeger, L. G., and Cheung, M. S. (1981). “Cellular and voided slab bridges.” J. Struct. Div., ASCE, 107(9), 1797–1813.
4.
Campbell, T. I., and Chitnuyanondh, L. (1975). “Horizontally curved continuous, post‐tensioned concrete beams.” PCI J., 20(2), 58–71.
5.
Cassell, A. C. (1975). Torsional properties of voided slabs, a confirmatory study. Dept. of Civ. Engrg., Imperial College, London, England, Feb.
6.
Cassell, A. C., and Basu, A. K. (1971). The experimental determination of the properties of voided slabs—a progress report. Dept. of Civ. Engrg., Imperial College, London, England, May.
7.
Cassell, A. C., Hobbs, R. E., and Basu, A. K. (1970). Properties of voided slabs. Dept. of Civ. Engrg., Imperial College, London, England, Nov.
8.
Elliot, G. (1975). “Discussion on stiffness parameters, Highway Engineering Computer Branch, Department of Environment.” Proc. Conf. on Computerized Bridge Design, 4/48–4/53.
9.
Green, R. (1975). “Post‐tensioned slab bridges on isolated supports.” J. Struct. Div., ASCE, 101(1), 233–247.
10.
Jofriet, J. C., McNeice, G. M., and Csagoly, P. F. (1972). “Analysis of posttensioned highway bridges with circular voids.” Proc. Specialty Conf. on Finite Element Method in Civ. Engrg., McGill University.
11.
Jofriet, J. C., McNeice, G. M., and Csagoly, P. F. (1973). “Finite element analysis of prestressed concrete voided bridge decks.” PCI J., 18(3), 51–66.
12.
McNeice, G. M. (1974). “Finite element computer program for analysis of plates with bending and in‐plane stresses.” RR 195, Ministry of Transp. and Communications, Downview, Ontario.
13.
Meades, P., and Green, R. (1974). “Model studies for voided posttensioned concrete slab bridges.” RR 195, Ministry of Transp. and Communications, Downview, Ontario, 62.
14.
Naaman, A. (1982) Prestressed concrete analysis and design. McGraw‐Hill, New York, N.Y.
15.
Renault, J. (1970). “Complexe d'Echange de la Porte de Bagnolet Precontrainte dans les Viaducs Courbes et Biais.” Annales de l'Institut Technique due Batiment et des Travaux Publics, France, 269, 109–135 (in French).
16.
Sawko, F., and Banerjee, B. (1973). Elastic behaviour of reinforced concrete cored and cellular bridge decks. Dept. of Civ. Engrg., Univ. of Liverpool, Liverpool, U.K., Aug.
17.
Sen, R., and Hodge, D. (1989). “Strength design of longitudinally and transversely posttensioned voided slab bridges.” Final Report, State Project No. 99700‐7369‐119, Volume 2, Florida Dept. of Transp./U.S. Dept. of Transp., Tampa, Fla., May.
18.
Sen, R., Gerges, A., and Sun, X. (1990a). “Analysis of prestress effects in continuous, curved, prestress girders.” Developments in Short and Medium Span Bridge Engineering '90, B. Bakht, R. Dorton, and L. Jaeger, eds., 1, 165–175.
19.
Sen, R., Issa, M., and Oline, L. (1990b). “Analytical and experimental evaluation of stiffness parameters of voided concrete slab bridges.” Final Report, State Project No. 99700‐7441‐010, Florida Dept. of Transp., Tampa, Fla., Jan.
20.
Sen, R., Issa, M., Gergess, A., and Sun, X. (1993). “Collapse load analysis of continuous, posttensioned voided slab bridge models.” J. Struct. Engrg., ASCE, 119(6), 1825–1843.
21.
Standard specifications for highway bridges. (1989). 14th Ed., Am. Assoc. of State Highway and Transp. Officials, Washington, D.C.
22.
Sun, X. (1989). “Two dimensional elastic analysis of continuous, prestressed voided slab bridges,” MSCE thesis, University of South Florida, Tampa, Fla.
23.
Timoshenko, S., and Woinowsky‐Krieger, S. (1959). Theory of plates and shells. McGraw‐Hill, London, England.
24.
Ward, K., and Cassell, A. C. (1974). Torsional properties of voided slabs. Dept. of Civ. Engrg., Imperial College, Univ. of London, London, England, Feb.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Oct 28, 1991
Published online: Feb 1, 1994
Published in print: Feb 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.