Mixed Finite Element Method for Analysis of Coupled Shear/Core Walls
Publication: Journal of Structural Engineering
Volume 119, Issue 5
Abstract
Theoretically, the finite element method can be applied to any type of building structure. However, not all elements are suitable for coupled wall analysis. Basically, the plane stress elements that model the walls should: (1) Have in‐plane rotations defined as vertical fiber rotations in order to allow direct connection and ensure compatibility with the beam elements; (2) be able to represent the strain state of pure bending so as to avoid parasitic shears; and (3) span at most only one story so that stress discontinuities at floor levels can be allowed. In this paper, two existing elements, namely Cheung's beam‐type element and Kwan's strain‐based element, which satisfy these criteria, are combined together to model shear/core wall structures so as to make the best use of these two elements. Two transition elements that behave like Cheung's element at one vertical edge and like Kwan's element at the other vertical edge are developed. The two existing elements and the two newly developed elements together form a family of wall elements with same degrees of freedom. Examples are given to illustrate the versatility and accuracy of such a mixed finite element method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Mahaidi, R. S., and Nilson, A. H. (1975). “Coupled shear wall analysis by Lagrange multipliers.” J. Struct. Div., ASCE, 101(11), 2359–2366.
2.
Bhatt, P. (1973). “Effect of beam‐shearwall junction deformations on the flexibility of the connecting beams.” Build. Sci., 8, 149–151.
3.
Chan, H. C., and Cheung, Y. K. (1979). “Analysis of shear walls using higher order elements.” Bldg. Envir., 14(3), 217–224.
4.
Cheung, Y. K. (1983). “Chapter 38: Tall buildings 2.” Handbook of Structural Concrete, F. K. Kong et al., eds., Pitman Books Limited, London, England.
5.
Cheung, Y. K., and Swaddiwudhipong, S. (1978). “Analysis of frame shear wall structures using finite strip elements.” Proc. Inst. Civ. Engrg., Part 2, 65, Sept., 517–535.
6.
Cook, R. D. (1975). “Avoidance of parasitic shear in plane element.” J. Struct. Div., ASCE, 101(6), 1239–1253.
7.
Girijavallabhan, C. V. (1969). “Analysis of shear walls with openings.” J. Struct. Div., 95(10), 2093–2103.
8.
Hall, A. S. (1969). “Joint deformation in building frames.” Trans. Inst. Engrs. Aust. Civ. Engrg., April, 60–62.
9.
Harrison, T., Siddall, J. M., and Yeadon, R. E. (1975). “A modified beam stiffness matrix for interconnected shear walls.” Build. Sci., 10, 89–94.
10.
Kwan, A. K. H. (1991). “Analysis of coupled wall/frame structures by frame method with shear deformation allowed.” Proc. Inst. Civ. Engrs., Part 2, 91, June, 273–297.
11.
Kwan, A. K. H. (1992). “Analysis of buildings using a strain‐based element with rotational DOF.” J. Struct. Engrg., 118(5), 1191–1212.
12.
MacLeod, I. A. (1969). “New rectangular finite element for shear wall analysis.” J. Struct. Div., ASCE, 95(3), 399–409.
13.
Mohr, G. A. (1982). “Finite element formulation by nested interpolations: Application to the drilling freedom problem.” Comput. Struct., 15(2), 185–190.
14.
Sisodiya, R. G., and Cheung, Y. K. (1971). “A higher order in‐plane parallelogram element and its application to skewed girder bridges.” Developments in Bridge Design and Construction, K. C. Rockey et al., eds., Crosby Lockwood, London, England, 304–317.
15.
Tso, W. K., and Biswas, J. K. (1973). “Analysis of core wall structures subjected to applied torque.” Bldg. Sci., 8, 251–257.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: May 18, 1992
Published online: May 1, 1993
Published in print: May 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.