Reliability‐Based Optimization of Series Systems of Parallel Systems
Publication: Journal of Structural Engineering
Volume 119, Issue 4
Abstract
Reliability‐based design of structural systems is considered. In particular, systems where the reliability model is a series system of parallel systems are treated. A sensitivity analysis for this class of problems is presented. Optimization problems with series systems of parallel systems are formulated. Direct and sequential optimization procedures to solve the optimization problems are developed. Four solution approaches are suggested and tested. The approaches include: (1) A direct approach including semianalytical sensitivities; (2) a direct approach including approximate sensitivities; (3) a sequential formulation based on optimality criteria; and (4) a sequential formulation including a new so‐called bounds iteration method (BIM). Numerical tests indicate that the sequential technique including the BIM is particularly fast and stable. The BIM is not only effective in reliability‐based optimization of series systems of parallel systems, but it is also efficient in reliability‐based optimization of series systems in general.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chamberlain, R. M., Powell, M. J. D., Lemarechal, C., and Pedersen, H. C. (1982). “The watchdog technique for forcing convergence in algorithms for constrained optimization.” Mathematical Programming Study 16, North‐Holland Publishing Co., Amsterdam, The Netherlands, 1–17.
2.
Enevoldsen, I. (1991). “Reliability‐based structural optimization,” PhD thesis, The Univ. of Aalborg, Aalborg, Denmark.
3.
Enevoldsen, I., and Sørensen, J. D. (1991). “JOINT3: An efficient optimization algorithm for calculation of the joint beta‐point in parallel systems.” Proc. of the Sixth Int. Conf. on Mechanical Behaviour of Materials—VI, M. Jono and T. Inoue, eds., Vol. 1, Pergamon Press, 583–588.
4.
Enevoldsen, I., and Sørensen, J. D. (1992). “Optimization algorithms for calculation of the joint design point in parallel systems.” Structural Optimization, Vol. 4, Springer‐Verlag, Berlin, Germany.
5.
Feng, Y. S., and Moses, F. (1986). “A method of structural optimization based on structural system reliability.” J. Struct. Mech., 14(4), 437–453.
6.
Frangopol, D. M. (1985). “Sensitivity of reliability‐based optimum design.” J. Struct. Engrg., ASCE, 111(8), 1703–1721.
7.
Fu, G., and Frangopol, D. M. (1980). “Reliability‐based vector optimization of structural systems.” J. Struct. Engrg., ASCE, 116(8), 2143–2161.
8.
Gill, P. E., Murray, W., and Wright, M. H. (1981). Practical optimization. Academic Press, Inc., San Diego, Calif.
9.
Gollwitzer, S., and Rackwitz, R. (1983). “Equivalent components in first‐order systems reliability.” Reliability Engrg., 5(1), 99–115.
10.
Hohenbichler, M. (1984). “An asymptotic formula for the probability of intersections.” Berichte zur Zuverlassigkeitstheorie der Bauwerke, Heft 69, LKI, Technische Universität München, 21–48.
11.
Hohenbichler, M., Gollwitzer, S., Kruse, W., and Rackwitz, R. (1987). “New light on first‐ and second‐order reliability methods.” Struct. Safety, 4(4), 267–284.
12.
Johnson, N. L., and Kotz, S. (1972). Distributions in statistics. Continuous multivariate distributions. John Wiley and Sons, New York, N.Y.
13.
Madsen, H. O. (1989). “Sensitivity factors for parallel systems.” Tech. Note, Danish Engrg. Academy, Lyngby, Denmark.
14.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). Methods of structural safety. Prentice Hall, Englewood Cliffs, N.J.
15.
Murotsu, Y., Kishi, M., Okada, H., Yonezawa, M., and Taguchi, K. (1984). “Probabilistically optimum design of frame structure.” 11th IFIP Conf. on System Modeling and Optimization, Springer‐Verlag, Berlin, Germany, 545–554.
16.
Powell, M. J. D. (1982). “VMCWD: A FORTRAN Subroutine for Constrained Optimization.” Report DAMTP 1982/NA4, Cambridge Univ., Cambridge, England.
17.
Schittkowski, K. (1980). “Nonlinear programming codes.” Lecture Notes in Economics and Mathematical Systems, No. 183, Springer‐Verlag, Berlin, Germany.
18.
Sørensen, J. D. (1986). “Reliability‐based optimization of structural elements.” Structural Reliability Theory, Paper No. 18, The Univ. of Aalborg, Aalborg, Denmark.
19.
Sørensen, J. D. (1987). “Reliability‐based optimization of structural systems.” Structural Reliability Theory, Paper No. 32, The Univ. of Aalborg, Aalborg, Denmark.
20.
Sørensen, J. D., and Faber, M. H. (1991). “Optimal Inspection and Repair Strategies for Structural Systems.” 4th IFIP Working Conf. on Reliability and Optimization of Structural Systems, R. Rackwitz and P. Thoft‐Christen, eds., Spring‐Verlag, Berling, Germany.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jan 20, 1992
Published online: Apr 1, 1993
Published in print: Apr 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.