Hot Spot Stresses of Tubular Joints Subjected to Combined Loadings
Publication: Journal of Structural Engineering
Volume 119, Issue 2
Abstract
An approach has been proposed to verify, and modify if necessary, the conventional method for determining the peak hot spot stresses of various configurations of tubular joints subjected to combined loadings. To illustrate the proposed approaches, three different sizes of TK square‐to‐round tubular joints were subjected to five basic load types (two axial loadings, two in‐plane bendings, and one out‐of‐plane bending) and six combinations of the basic load types. The accuracy of the peak hot spot stresses estimated by the conventional method for combined loadings were found to be closely related to the types of loading condition involved. This relation is due to the possible change in peak stress locations when various basic load types are combined. The peak hot spot stresses of some combined loadings are significantly overestimated by the conventional method and can be reduced to provide accurate data for fatigue analysis.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Design of tubular joints for offshore structures.” (1985). Publication UR33, Underwater Engineering Group (UEG), London, England.
2.
PAFEC data preparation. (1989). Program for Automatic Finite Element Calculations (PAFEC) Limited, Strelley Hall, Nottingham, England.
3.
“Recommended practice for planning, designing and constructing fixed offshore platforms.” (1987). API Recommended Practice 2A (RP2A), 17th Ed., American Petroleum Institute, Washington, D.C.
4.
Soh, A. K., and Soh, C. K. (1991). “SCF equations for square‐to‐round tubular joints.” J. Constr. Steel Res., 19(2), 81–95.
5.
Soh, A. K., Soh, C. K., and Fan, S. C. (1990). “Alternative conductor guide design for offshore structures.” Applied Research Project No. ARP‐M‐85‐33, Nanyang Technological Institute, Republic of Singapore.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jun 25, 1992
Published online: Feb 1, 1993
Published in print: Feb 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.