Optimum Limit Design of Continuous Prestressed Concrete Beams
Publication: Journal of Structural Engineering
Volume 119, Issue 12
Abstract
Earlier studies on the design of reinforced concrete structures by equilibrium‐serviceability methods (that simultaneously satisfy collapse and service criteria) are extended to continuous prestressed and partially prestressed concrete structures. The objectives of the paper are to present a practical design approach to nonlinear design for prestressed concrete structures and to identify its potential benefits. The paper also demonstrates the conflict between desirable plastic redistribution (at ultimate limit state) and zero or limited cracking (at serviceability limit state) for fully prestressed concrete structures. Optimization results suggest that partially prestressed concrete structures represent the most economical compromise between these conflicting criteria, and the optimal prestressing degree strikes a good balance between adequate service conditions (stresses, cracking, and deflection) and economy. Optimization of prestressed concrete beams is cast as a nonlinear programming problem and is solved by the projected Lagrangian algorithm. Examples of (three‐span and two‐span) continuous‐beam optimizations illustrate the method and its features, as well as resulting differences between full and partial prestressing design solutions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adin, M., Cohn, M. Z., and Pinto, M. (1980). “Comprehensive optimal limit design of reinforced concrete bridges.” Proc. Int. Symp. on Inelasticity and Nonlinearity in Struct. Concr.: SM Study No. 8, Univ. of Waterloo Press, Waterloo, Ontario, Canada, 349–378.
2.
Brook, A., Kendruck, D., and Meeraus, A. (1988). GAMS—General Algebraic Modeling System: A user's guide. Scientific Press, Redwood City, Calif.
3.
“Building code requirements for reinforced concrete.” (1989). ACI 318‐89, Am. Concr. Inst., Detroit, Mich.
4.
Cohn, M. Z. (1965). “Optimum limit design for reinforced concrete beams.” Proc., Institution of Civil Engineers, London, England, 30, 675–707.
5.
Cohn, M. Z. (1967). “Limit design solutions for reinforced concrete frames.” J. Struct. Div., ASCE, 94(10), 2467–2483.
6.
Cohn, M. Z. (1969). “Optimum limit design for concrete frames.” ASCE Annual Meeting, ASCE, New York, N.Y.
7.
Cohn, M. Z. (1985). “Continuity in prestressed concrete.” Partial prestressing from theory to practice (Proc. NATO‐Advanced Res. Workshop), Martinus Nijhoff Publishers, Dordrecht, the Netherlands, 189–256.
8.
Cohn, M. Z., and Lounis, Z. (1991a). “Moment redistribution in structural concrete codes.” Can. J. Civ. Engrs., 18(1), 97–108.
9.
Cohn, M. Z., and Lounis, Z. (1991b). “Service ability control and nonlinear design of concrete structures.” Annales Institut Technique du Batiment et des Travaux Publics, Paris, France, 493, 26–53 (in French).
10.
Cohn, M. Z., and MacRae, A. J. (1984). “Optimization of structural concrete beams.” J. Struct. Engrg., ASCE, 110(7), 1573–1588.
11.
Cohn, M. Z., and Riva, P. (1989). “Equilibrium‐serviceability design of hyperstatic P.C. beams.” Proc. Sessions Related to Design, Analysis, and Testing, ASCE Struct. Congress, San‐Francisco, CA, 1989, ASCE, 201–212.
12.
Cohn, M. Z., and Riva, P. (1991). “Flexural ductility of structural concrete sections.” Precast/Prestressed Concr. Inst., J., 36(2), 72–87.
13.
Cohn, M. Z., and Riva, P. (1992). “Yield safety, cracking control and moment redistribution.” J. Struct. Engrg., ASCE, 118(2), 447–468.
14.
“Design of concrete structures.” (1989). Eurocode No. 2, Commission of the European Communities, Oct.
15.
Francis, R. (1972). “Optimal design of continuous prestressed concrete beams.” Proc. Int. Symp. on Inelasticity and Nonlinearity in Struct. Concr.: SM Study No. 8, Univ. of Waterloo Press, Waterloo, Ontario, Canada, 441–70.
16.
Goble, G. G., and Lapay, W. S. (1971). “Optimum design of prestressed beams.” ACI J., 68, 712–718.
17.
Kirsch, U. (1972). “Optimum design of prestressed beams.” Comput. & Struct., 2(4), 573–583.
18.
Kirsch, U. (1973). “Optimum design of prestressed plates.” J. Struct. Div., ASCE, 99(6), 1075–1090.
19.
Lounis, Z., and Cohn, M. Z. (1992). “Optimal design of prestressed concrete highway bridge girders.” Proc. 3rd ACI Int. Symp. on Concr. Bridge Design, American Concrete Institute, Detroit, Mich.
20.
Lounis, Z., and Cohn, M. Z. (1993). “Multiobjective optimization of prestressed concrete structures.” J. Struct. Engrg., ASCE, 119(3), 794–808.
21.
MacRae, A. J., and Cohn, M. Z. (1986). “Optimization of prestressed concrete flat plates.” J. Struct. Engrg., ASCE, 113(5), 943–957.
22.
Murtagh, B. A., and Saunders, M. A. (1980). “MINOS/Augmented—User's manual.” Tech. Report SOL 80‐14, Dept. of Operations Res., Stanford Univ., Stanford, Calif.
23.
Naaman, A. E. (1976). “Minimum cost vs. minimum weight of prestressed slabs.” J. Struct. Div., ASCE, 102(7), 1493–1505.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Nov 23, 1992
Published online: Dec 1, 1993
Published in print: Dec 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.