Second‐Order Refined Plastic‐Hinge Analysis for Frame Design. Part II
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Structural Engineering
Volume 119, Issue 11
Abstract
This paper discusses several issues pertinent to the use of advanced analysis for design of two‐dimensional steel‐frame structures. In particular, the accuracy of the elastic‐plastic‐hinge method is examined, and its range of application and limitations are identified. An approach called the refined plastic‐hinge method, the formulation of which has been presented in a companion paper, is recommended and its design implications are discussed. Case studies are presented to demonstrate the validity of the refined plastic‐hinge method in predicting the strength and stability of individual member and overall system strength. Also, the performance of this analysis model is evaluated by comparing the results with those from elastic‐plastic‐hinge and refined plastic‐zone analyses. The goal is to illustrate the qualities and limitations of the plastic‐hinge‐based analysis methods with regard to their acceptability for use in predicting the limiting strength and behavior of steel members and frames.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chen, W. F., Duan, L., and Zhou, S. P. (1990). “Second‐order inelastic analysis of braced portal frames—Evaluation of design formulae in LRFD and GBJ specification.” J. Singapore Structural Streel Society, Steel Structures, 1(1), 5–15.
2.
ECCS “Essentials of Eurocode 3 design manual for steel structures in building.” (1991). ECCS‐Advisory Committee5, No. 65, European Convention for Constructional Steelwork.
3.
Galambos, T. V. (1988). Guide to stability design criteria for metal structures. Fourth Ed., John Wiley & Sons, New York, N.Y.
4.
Kanchanalai, T. (1977). “The design and behavior of beam‐columns in unbraced steel frames.” AISI Project No. 189, Report No. 2, Univ. of Texas at Austin, Austin, Tex.
5.
King, W. S., White, D. W., and Chen, W. F. (1991). “On second‐order inelastic methods for steel frame design.” Structural Engineering Report, CE‐STR‐91‐16, Purdue Univ., West Lafayette, Ind.
6.
Liew, J. Y. R. (1992). “Advanced analysis for frame design,” Ph.D dissertation, Purdue Univ., West Lafayette, Ind.
7.
Liew, J. Y. R., White, D. W., and Chen, W. F. (1991). “Beam‐column design in steel frameworks—Insight on current methods and trends.” J. Constr. Steel Res., 18, 269–308.
8.
Liew, J. Y. R., White, D. W., and Chen, W. F. (1993). “Second‐order refined plastic hinge analysis for frame design. Part I.” J. Struct. Engrg., ASCE, 119(11), 3196–3216.
9.
Load and resistance factor design specification for structural steel buildings. (1986). 1st Ed., American Inst. of Steel Constr., (AISC), Chicago, Ill.
10.
Vogel, U. (1985). “Calibrating frames.” Stahlbau, 10, Oct., 295–301.
11.
White, D. W., Liew, J. Y. R., and Chen, W. F. (1991). “Second‐order inelastic analysis for frame design: A report to SSRC Task Group 29 on recent research and the perceived state‐of‐the‐art.” Structural Engineering Report, CE‐STR‐91‐12., Purdue Univ., West Lafayette, Ind.
12.
Yura, J. A. (1988). Elements for teaching load and resistance factor design. Combined bending and axial load. Univ. of Texas at Austin, Austin, Tex., 55–71.
13.
Zhou, S. P., Duan, L., and Chen, W. F. (1990). “Comparison of design equations for steel beam‐columns.” Struct. Engrg. Rev., 2(1), 45–53.
14.
Ziemian, R. D. (1989). Verification study. Draft Version, Cornell Univ., Ithaca, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Mar 9, 1992
Published online: Nov 1, 1993
Published in print: Nov 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.