Stochastic Optimization Models for Structural‐Reliability Analysis
Publication: Journal of Structural Engineering
Volume 119, Issue 1
Abstract
The present paper provides a method for the identification of failure modes that contribute significantly to the estimate of the system probability of failure in rigid‐plastic structures. For structures where loads and resistances are random variables, a decision rule is presented for the identification of failure modes in series systems based on their contribution to the system probability of failure. Stochastic programs based on this decision rule for failure mode selection are developed for the identification of failure modes in structures. Examples illustrate the use of these mathematical programs in identifying significant failure modes in rigid‐plastic structures where axial force‐moment interaction is included.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arnbjerg‐Nielsen, T., and Ditlevsen, O. (1990). “Rigid‐ideal plastic system reliability.” Proc., Reliab. and Optim. of struct. Sys. '90, 3rd IFIP W.G. 7.5 Conf., A. Der Kiureghian and P. Thoft‐Christensen, eds., Springer‐Verlag, Berlin, Germany, 13–21.
2.
Baker, J. F., and Heyman, J. (1969). Plastic design of frames 1—Fundamentals. Cambridge University Press, Cambridge, Mass.
3.
Cohn, M. Z., and Rafay, T. (1974). “Collapse load analysis of frames considering axial forces.” J. Engrg. Mech. Div., ASCE, 100(4), 773–794.
4.
Ditlevsen, O., and Bjerager, P. (1986). “Methods of structural system reliability.”Struct. Saf., 3/4, 195–229.
5.
Ellis, J. H., Zimmerman, J. J., and Corotis, R. B. (1991). “Stochastic programs for identifying critical structural collapse mechanisms.” Appl. Math. Modelling, 15(7), 367–373.
6.
Gorman, M. R. (1981). “Automatic generation of collapse mode equations.” J. Struct. Div., ASCE, 107(7), 1350–1354.
7.
Grimmelt, M. J., and Schuëller, G. I. (1982). “Benchmark study on methods to determine collapse failure probabilities of redundant structures.” Struct. Saf., Vol. 1, 93–106.
8.
Hodge, Philip G. (1959). Plastic analysis of structures. McGraw‐Hill, New York, N.Y.
9.
Ma, H. F., and Ang, A. H‐S. (1981). “Reliability analysis of redundant ductile structural systems.” Civ. Engrg. Studies: Struct. Res. Series No. 494, Univ. of Illinois, Urbana, Ill.
10.
Melchers, R. E., and Tang, L. K. (1984). “Dominant failure modes in stochastic structural systems.” Struct. Saf., 2(2), 127–143.
11.
Moses, F. (1974). “Reliability of structural systems.” J. Struct. Div., ASCE, 100(9), 1813–1820.
12.
Murtagh, B. A., and Saunders, M. A. (1987). MINOS 5.1 users guide: Technical report SOL 83‐20R. System Optimization Lab., Dept. of Operation Res., Stanford Univ., Stanford, Calif.
13.
Nafday, A. M., Corotis, R. B., and Cohon, J. L. (1988a). “Multiparametric limit analysis of frames: Part I—Model.” J. Engrg. Mech., ASCE, 114(3), 377–386.
14.
Nafday, A. M., Corotis, R. B., and Cohon, J. L. (1988b). “Multiparametric limit analysis of frames: Part II—Computations.” J. Engrg. Mech., ASCE, 114(3), 387–403.
15.
Neal, B. G., and Symonds, P. S. (1952). “The rapid calculation of the plastic collapse load for a framed structure.” J. Instn. Civ. Engrs., Part 3, Vol. 1, 58–71.
16.
Nielsen, M. P. (1984). Limit analysis and concrete plasticity. Prentice‐Hall, Englewood Cliffs, N.J.
17.
Onat, E. T., and Prager, W. (1953). “The influence of axial forces on the collapse loads of frames.” Proc., 1st Midwestern Conf. on Solid Mech., Univ. of Illinois, Urbana, Ill., 40–42.
18.
Polizzotto, C., and Mazzarella, C. (1979). “Limit Design of Frames with Axial Force—Bending Moment Interaction.” J. Struct. Mech., 7(1), 83–106.
19.
Sawczuk, A. (1989). Mechanics and plasticity of structures. John Wiley & Sons, New York, N.Y.
20.
Simões, L. M. C. (1990a). “Stochastically dominant modes of frames by mathematical programming.” J. Struct. Engrg., ASCE, 116(4), 1040–1060.
21.
Simões, L. M. C. (1990b) . “Reliability of portal frames with interacting stress resultants.” J. Struct. Engrg., ASCE, 116(12), 3475–3496.
22.
Thoft‐Christensen, P., and Murotsu, Y. (1986). Application of structural systems reliability theory. Springer‐Verlag, Berlin, Germany.
23.
Zimmerman, J. J. (1991). Analysis of structural system reliability with stochastic programming, PhD thesis, Dept. Civ. Engrg., Johns Hopkins Univ., Baltimore, Md.
24.
Zimmerman, J. J., Corotis, R. B., and Ellis, J. H. (1992). “Collapse mechanism identification using a systems‐based objective.” Struct. Saf., 11(3), 157–171.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Aug 21, 1991
Published online: Jan 1, 1993
Published in print: Jan 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.