Shear Connectors in Composite Beams with Longitudinally Cracked Slabs
Publication: Journal of Structural Engineering
Volume 118, Issue 8
Abstract
The longitudinal shear flow in composite steel and concrete beams is transferred across the steel‐flange‐concrete‐slab interface at a discrete number of points by the dowel action of individual shear connectors. The strengths of these dowels are affected by the presence of longitudinal cracks in the concrete slab that may have been formed by transverse flexural forces in the slab or by splitting or by shear forces that are induced by the dispersal of the dowel forces into the concrete slab. Twenty‐five push specimens are tested to determine the effect of transverse reinforcement on the dowel strength of shear connectors that are embedded in longitudinally cracked concrete slabs. This postcracking dowel strength is quantified, and it is found that it is affected by the stiffness of the transverse reinforcement, but not by its strength.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Australian Standard 2327, Part 1—1980. SAA composite construction code. Part 1—Simply supported beams. (1980). Standards Association of Australia, Sydney, Australia.
2.
BS5400: Part5. Steel, concrete and composite bridges. (1979). British Standards Inst., London, England.
3.
“Eurocode no. 4: Common unified rules for composite steel and concrete structures, draft for national comment.” (1985). Report EUR 9886EN, Commission of European Communities, Luxembourg, Luxembourg.
4.
Hawkins, N. M. (1973). “The strength of stud shear connectors.” Trans. Inst. Aust. Civ. Engrg., 15, 46–52.
5.
Hofbeck, J. A., Ibrahim, I. O., and Mattock, A. H. (1969). “Shear transfer in reinforced concrete.” ACI J., 66(2), 119–127.
6.
Johnson, R. P. (1971). “Transverse reinforcement in composite beams for buildings.” Struct. Engr., 49, May, 239.
7.
Johnson, R. P., and Oehlers, D. J. (1981). “Analysis and design for longitudinal shear in composite T‐beams.” Proc. Inst. Civ. Engrs., Part 2, 71, Dec., 989–1021.
8.
Johnson, R. P., and Oehlers, D. J. (1982). “Design for longitudinal shear in composite L beams.”Proc. Inst. Civ. Engrs., Part 2, 73, Mar., 147–170.
9.
Maeda, Y., Matsui, S., and Hiragi, H. (1983). “Effects of concrete‐placing direction on static and fatigue strengths of stud shear connectors.” Tech. Reports of the Osaka Univ., Osaka Univ., Osaka, Japan.
10.
Mattock, A. H., and Hawkins, N. M. (1972). “Shear transfer in reinforced concrete—Recent research.” PCIJ., March‐April, 55–73.
11.
Oehlers, D. J. (1989). “Splitting induced by shear connectors in composite beams.” J. Struct. Engrg., ASCE, 115(2), 341–362.
12.
Oehlers, D. J. (1990). “Deterioration in strength of stud connectors in composite bridge beams.” J. Struct. Engrg., ASCE, 116(12), 3417–3431.
13.
Oehlers, D. J., and Coughian, C. G. (1986). “The shear stiffness of stud shear connections in composite beams.” J. Constr. Steel Res., 6(4), 273–284.
14.
Oehlers, D. J., and Johnson, R. P. (1981). “The splitting strength of concrete prisms subjected to surface strip or patch loads.” Mag. Concr. Res., 33(116), 171–179.
15.
Oehlers, D. J., and Johnson, R. P. (1987). “The strength of stud shear connections in composite beams.” Struct. Engr., 65B(2), 44–48.
16.
Oehlers, D. J., and Park, S. M. (1992). “Strength of shear connectors in haunched composite beams.” J. Struct. Engrg., ASCE.
17.
Ollgaard, J. G., Slutter, G. S., and Fisher, J. W. (1971). “Shear strength of stud shear connectors in lightweight and normal‐weight concrete.” Engrg. J. Am. Inst. Steel Constr., 8, Apr., 55–64.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Aug 1, 1992
Published in print: Aug 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.