Predicting Behavior of Cyclically Loaded RC Structures
Publication: Journal of Structural Engineering
Volume 118, Issue 2
Abstract
Using strain‐induced orthotropic material concepts, a new numerical constitutive model for predicting the cyclic loading behavior of reinforced concrete (RC) is formulated. A state of plane stress is assumed. The response is considered to be kinematically linear, but it accounts for the nonlinear material behavior. Cyclic‐loading‐induced damage is accommodated. Only the uniaxial compressive strength of the concrete and the yield stress of the reinforcing steel are needed as input to predict both constitutive behavior and structural strength. The approach is simple, reliable, and computationally efficient. The constitutive model is demonstrated by using a finite‐element program to successfully predict the behavior of a highly nonlinear deep beam structure for which experimental test results were obtained from the literature.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI 318‐83: Building code requirements for reinforced concrete. (1983). American Concrete Institute (ACI), Detroit, Mich.
2.
Agrawal, A. B., Jaeger, L. G., and Mufti, A. A. (1980). “Elastoplastic material model for nonlinear analysis of planar RC structures under cyclic loadings. Canadian J. of Civ. Engrg., 7(2), 294–303.
3.
Ahmad, S. (1981). “Properties of confined concrete under static and dynamic loads,” thesis presented to the University of Illinois, at Chicago, Ill., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
4.
Aktan, H. M., and Hanson, R. D. (1980). “Nonlinear cyclic analysis of reinforced concrete plane stress members.” Reinforced concrete structures subjected to wind and earthquake forces; ACI Publication SP‐63, American Concrete Institute (ACI), Detroit, Mich.
5.
Biblis, E. J. (1965). “Analysis of wood‐fiberglass beams within and beyond the elastic region.” Forest Products J., 14(2), 81–88.
6.
Buyukozturk, O., and Tseng, T. M. (1984). “Concrete in biaxial cyclic compression.” J. Struct. Engrg., ASCE, 110(3), 461–476.
7.
Cervenka, V. (1970). “Inelastic finite element analysis of reinforced concrete panels under in‐plane loads,” thesis presented to the University of Colorado‐Boulder, at Boulder, Colo., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
8.
Chen, W. F. (1982). Plasticity in reinforced concrete. McGraw‐Hill Book Co., Inc., New York, N.Y.
9.
Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989). Concepts and applications of finite element analysis. John Wiley and Sons, New York, N.Y.
10.
Darwin, D., and Pecknold, D. A. (1976). “Analysis of RC shear panels under cyclic loading.” J. Struct. Div., ASCE, 102(2), 355–369.
11.
Fafitis, A., and Shah, S. P. (1984). “Rheological model for cyclic loading of concrete.” J. Struct. Engrg., ASCE, 110(9), 2085–2102.
12.
Fardis, M. N., Alibe, B., and Tassoulas, J. L. (1983). “Monotonic and cyclic constitutive law for concrete.” J. Engrg. Mech., ASCE, 109(2), 516–536.
13.
Ghoneim, G. A. M., and Ghali, A. (1982). “Nonlinear analysis of concrete structures.” Canadian J. of Civ. Engrg., 9(3), 489–501.
14.
Gopalaratnam, V. S., and Shah, S. P. (1985). “Softening response of plain concrete in direction tension.” ACI J., 82(2), 310–323.
15.
Hughes, B. P., and Chapman, G. P. (1966). “The complete stress‐strain curve for concrete in direct tension.” RILEM Bulletin 30, 95–97.
16.
Jones, R. M. (1975). Mechanics of composite materials. McGraw‐Hill Book Co., Inc., New York, N.Y.
17.
Kupfer, H., Hilsdorf, H. K., and Rusch, H. (1969). “Behavior of concrete under biaxial stresses.” J. American Concrete Inst., 66(8), 656–666.
18.
Marti, P., and Kong, K. (1987). “Response of reinforced concrete slab elements to torsion.” J. Struct. Engrg., ASCE, 113(5), 976–993.
19.
Marti, P., Leesti, P., and Khalifa, W. U. (1987). “Torsion tests on reinforced concrete slab elements.” J. Struct. Engrg., ASCE, 113(5), 994–1010.
20.
Perdikaris, P. C., and White, R. N. (1985). “Shear modulus of precracked R/C panels.” J. Struct. Div., ASCE, 111(2), 270–289.
21.
Rule, W. K. (1986). “A simple nonlinear constitutive model for finite element investigation of reinforced concrete structures,” thesis presented to the University of Wisconsin‐Madison, at Madison, Wisc., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
22.
Rule, W. K., and Rowlands, R. E. (1989). “A simple orthotropic elasticity‐based constitutive model for reinforced concrete.” Experimental Mech., (29/4), 448–454.
23.
Timoshenko, S. P., and Woinowsky‐Krieger, S. (1959). Theory of plates and shells, 2nd Ed., McGraw‐Hill Book Co., Inc., New York, N.Y.
24.
Vecchio, F. J., and Collins, M. P. (1986). “Modified compression‐field theory for reinforced concrete elements subjected to shear.” J. American Concrete Inst., 83(2), 219–231.
25.
Wangaard, F. F. (1964). “Elastic deflection of wood‐fiberglass composite beams.” Forest Products J., 14(6), 256–260.
26.
Yankelevsky, D. Z., and Reinhardt, H. W. (1989). “Uniaxial behavior of concrete in cyclic tension.” J. Struct. Engrg., ASCE, 115(1), 166–182.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Feb 1, 1992
Published in print: Feb 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.