Hygrothermal Effects on Mechanical Properties of Lumber
Publication: Journal of Structural Engineering
Volume 118, Issue 2
Abstract
As part of a parent study of possible environmental effects on the long‐term load‐carrying performance of structural lumber, the material characteristics of a lumber sample are evaluated in several hygrothermal states. The modulus of elasticity and modulus of rupture of sorted groups of select structural Douglas‐fir lumber are determined from standard pseudostatic bending tests after the groups are brought into equilibrium with various prescribed environments. Lognormal statistical distributions of strength and stiffness of the various groups are related by evaluating the distribution parameters as quadratic functions of temperature and moisture content. The correlation between modulus of elasticity and modulus of rupture, and observed modes of failure, are also presented as they pertain to changes in temperature and moisture content.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aplin, N. E., Green, D. W., Evans, J. W., and Barrett, J. D. (1986). “Moisture content and the flexural properties of Douglas‐fir dimension lumber.” Res. Pap. FPL 475, USDA, Madison, Wisc.
2.
Barrett, J. D., Green, D. W., and Evans, J. W. (1989). “Temperature adjustments for the North American in‐grade testing program.” In‐grade testing of structural lumber, Forest Products Res. Soc., Madison, Wisc., 27–38.
3.
Fridley, K. J., Tang, R. C., and Soltis, L. A. (1988). “Effect of temperature on duration of load of structural lumber.” Proc. of the 1988 Int. Conf. on Timber Engrg., R. Y. Itani, ed., Forest Products Res. Soc., Madison, Wisc., 1, 390–394.
4.
Fridley, K. J., Tang, R. C., and Soltis, L. A. (1989a). “Effect of cyclic temperature on duration of load of solid lumber in bending.” Proc. Mech. of Cellulosic and Polymeric Materials, R. W. Perkins Jr., ed., ASME, 99, 179–184.
5.
Fridley, K. J., Tang, R. C., and Soltis, L. A. (1989b). “Effect of relative humidity on duration of load of structural lumber.” Proc. of the Second Pacific Timber Engrg. Conference, Univ. of Auckland, 1, 207–212.
6.
Fridley, K. J., Tang, R. C., and Soltis, L. A. (1989c). “Thermal effects on load‐duration behavior of lumber. Part I. Effect of constant temperature.” Wood and Fib. Sci., 21(4), 420–431.
7.
Fridley, K. J., Tang, R. C., and Soltis, L. A. (1990a). “Thermal effects on load‐duration behavior of lumber. Part II. Effect of cyclic temperature.” Wood and Fib. Sci., 22(2), 204–216.
8.
Fridley, K. J., Tang, R. C., and Soltis, L. A. (1990b). “Effect of cyclic relative humidity on the duration of load behavior of structural lumber.” Proc. of the 1990 Timber Engrg. Conference, Science University of Tokyo, 2, 407–415.
9.
Fridley, K. J., Tang, R. C., and Soltis, L. A. (1991). “Moisture effects on load‐duration behavior of lumber. Part I. Effect of constant relative humidity.” Wood and Fib. Sci., 23(1), 114–127.
10.
Gerhards, C. C. (1968). “Four‐inch southern pine lumber: Seasoning factors for modulus of elasticity and modulus of rupture.” Forest Products J., 18(11), 27–35.
11.
Gerhards, C. C. (1970). “Further report on seasoning factors for modulus of elasticity and modulus of rupture.” Forest Products J., 20(5), 40–44.
12.
Gerhards, C. C. (1982). “Effect of moisture content and temperature on the mechanical properties of wood: An analysis of immediate effects.” Wood and Fibers, 14(1), 4–36.
13.
Gerhards, C. C. (1988). “Effect of grade on load‐duration of Douglas‐fir in bending.” Wood and Fib. Sci., 20(1), 146–161.
14.
Green, D. W., Evans, J. W., Barrett, J. D., and Aplin, E. N. (1988). “Predicting the effects of moisture content on the flexural properties of Douglas‐fir dimension lumber.” Wood and Fib. Sci., 20(1), 107–131.
15.
Green, D. W., Link, C. L., Debonis, A. L., and McLain, T. E. (1986). “Predicting the effect of moisture content on the flexural properties of southern pine dimension lumber.” Wood and Fib. Sci., 18(1), 134–156.
16.
Madsen, B. (1975). “Moisture content‐strength relationship for lumber subjected to bending.” Canadian J. of Civ. Engrg., 2(4), 466–473.
17.
Madsen, B., Jansen, W., and Zwaagstra, J. (1980). “Moisture effects in lumber.” Structural Research Series, Report No. 27, Dept. of Civ. Engrg., Univ. of British Columbia, Vancouver, Canada.
18.
McLain, T. E., Debonis, A. L., Green, D. W., Wilson, F. J., and Link, C. L. (1984). “The influence of moisture content on the flexural properties of southern pine dimension lumber.” Res. Pap. FPL 447, USDA, Madison, Wisc.
19.
“Standard D 143‐83: Standard methods of testing small clear specimens of timber.” (1985). 1985 annual book of ASTM standards, ASTM, Philadelphia, Penn., 47–103.
20.
“Wood handbook: Wood as an engineering material.” (1987). Agricultural handbook No. 72, USDA, Forest Service, Forest Products Lab., Madison, Wisc.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Feb 1, 1992
Published in print: Feb 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.