Strength and Behavior of Slender Steel Pipe under Prestressing force
Publication: Journal of Structural Engineering
Volume 118, Issue 10
Abstract
The results of an experimental investigation of the behavior and compression strength of a slender steel tube under prestressing force are described. A series of tests were conducted using 20‐ft (6.09‐m) long straight or circularly bent steel pipes of 1.315‐in. (33.4‐mm) and 1.9‐in. (48.3‐mm) external diameter. Prestressing tendons were passed through the pipes, and anchorage devices were placed at both ends, allowing prestressing force to be introduced by means of a jack. Separate tests were conducted on test samples (both straight and curved) where tendons were loosely passed through the interior of the pipes and on samples where tendons were provided with rings spaced at intervals of 1.0 ft (30.5 cm) and 1.5 ft (45.7 cm), securing almost an concentric position of the tendons in the pipes' interior or limited eccentricity of 1.315 in. and of 1.9 in. diameter of pipe. The relaxation and its effect on the prestressed regular steel pipe was also measured.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Drewnowski, S. (1978). “Betonowe Konstrukcje Mostowe Sprezono‐Rozprezone (Prestretched‐prestressed concrete bridge structures).” Panstwowe Wydawnictwo Naukowe, Oddzial Warszawa‐Lodz, Poland, 1–79 (in Polish).
2.
Dwyer, T. G., and Galambos, T. V. (1965). “Plastic behavior of tubular beam columns.” J. Struct. Div., ASCE, 91(4), 153–168.
3.
Hathout, I. A., Temple, M. C., and Ellis, J. S. (1978). “Buckling of space stayed columns.” J. Struct. Div., ASCE, 105(9), 1805–1822.
4.
Key, P. W., Hasan, W. H., and Hancock, G. J. (1988). “Column behaviour of cold‐formed hollow sections.” J. Struct. Engrg., ASCE, 114(2), 390–407.
5.
Knowles, R. B., and Park, R. (1970). “Axial load design for concrete filled steel tubes.” J. Struct. Div., ASCE, 96(10), 2125–2153.
6.
Koretsky, A. V., and Pritchard, R. W. (1982). “Assessment of relaxation loss estimates for strands.” J. Struct. Div., ASCE, 108(12), 2819–2836.
7.
Schilling, C. G. (1965). “Buckling strength of circular tubes.” J. Struct. Div., ASCE, 91(5), 325–348.
8.
Stress‐relaxation tests for materials. (1978). Annual book of ASTM Standards, part 10, American Society for Testing and Materials, 465–489.
9.
Zielinski, Z. A. (1954). “O sprezeniu konstruckji stalowych (Prestressed steel structures).” Inzyieria i Budownictwo, 7, (in Polish).
10.
Zielinski, Z. A. (1956). “Dwa przklady zastosowania w Polsce sprezania do wyzmocnienia istiejacych konstruckji (Two examples of use of post‐tensioning for strengthening of existing structures in Poland).” Inzynieria i Budownictow, 1.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Oct 1, 1992
Published in print: Oct 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.