Elastic Wood Properties from Dynamic Tests and Computer Modeling
Publication: Journal of Structural Engineering
Volume 118, Issue 10
Abstract
Elastic moduli for a specimen of Norway spruce (Picea abies) have been evaluated by dynamic tests and corresponding computer calculations. Modal testing of a wooden beam of structural size resulted in modal properties for 13 different modes of vibration. Corresponding modes of vibration were calculated using a finite element model based on Timoshenko beam elements with constant homogeneous properties. Similarity between experimental and theoretical values for eigenfrequencies for the fundamental axial mode of vibration required a value for Young's modulus Corresponding matching of the fundamental frequency for torsional vibration yielded The calculated eigenfrequencies for higher modes of vibration correspond very well to the experimental values. It should be noted specifically that the eigenfrequencies for edge‐wise bending modes correspond well, although the value for the shear modulus was based on a torsional mode matching.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bodig, J., and Jayne, B. A. (1982). Mechanics of wood and wood composites. Van Nostrand Reinhold Company Inc., New York, N.Y.
2.
Chui, Y. H., and Smith, I. (1990). “Influence of rotary inertia, shear deformation and support condition on natural frequencies of wooden beams,” Wood Sci. Tech., 24, 233–245.
3.
Dolan, J. D. (1989). “The dynamic response of timber shear walls,” PhD thesis, Univ. of British Columbia, Vancouver, British Columbia, Canada.
4.
Ewins, D. (1984). Modal testing: theory and practice. Research Studies Press, Somerset, England.
5.
Goldsmith, V., and Grossman, P. (1966). “The effect of frequency of vibration on the viscoelastic properties of wood,” J. Inst. Wood Sci., 18, 44–53.
6.
Kollmann, F. F. P., and Côté, W. A. (1968). Principles of wood science and technology: Part I Solid wood. Springer‐Verlag, Berlin, Germany.
7.
Nakai. T., Tanaka, T., and Nagao, H. (1990). “Comparisons of non‐destructive tests for measuring modulus of elasticity as a parameter for grading sawn timber,” Proc. of the 1990 Int. Timber Engineering Conf., Tokodo Shoten, Tokyo, Japan, Vol. II, 539–544.
8.
Ohlsson, S. (1982). “Floor vibration and human discomfort,” PhD thesis, Chalmers Univ. of Technology, Göteborg, Sweden.
9.
Pellerin, R. (1965). “A vibrational approach to nondestructive testing of structural lumber,” Forest Products J., 15(3), 93–101.
10.
Timoshenko, S., and Young, D. H. (1954). Vibration problems in engineering, 3rd o Ed., Van Nostrand Company Inc., New York, N.Y.
11.
Åkesson, B., and Friberg, O. (1980). “SFVIBAT II: A computer program for space frame vibration analysis,” Publ. No. 28, Div. of Solid Mechanics, Chalmers Univ. of Technology, Göteborg, Sweden.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Oct 1, 1992
Published in print: Oct 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.