Distortional Buckling Solutions for Continuous Composite Beams
Publication: Journal of Structural Engineering
Volume 118, Issue 1
Abstract
The paper presents a theoretical analysis of fixed‐ended composite steel‐concrete beams, representative of members continuous over an internal support. The analysis is elastic, and allows for the variation of sagging and hogging bending along the member. The stress resultants obtained from the virtual work analysis are used for an extensive finite element study of lateral‐distortional buckling of fixed‐ended composite beams. The details of the computer program adopted are described elsewhere. Based on the elastic buckling solutions, a design method is proposed to calculate the strength of the composite beam with respect to the buckling limit state. This design method is less conservative than that implied in current design codes, and leads to economies of material. The analysis for continuous composite beams provides a benchmark study for future studies.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AS4100‐1990 SA Steel structures code, (1990). Standards Australia, Sydney, Australia.
2.
Barsoum, R. S., and Gallagher, R. H. (1970). “Finite element analysis of torsional and torsional‐flexural stability problems.” Int. J. Numerical Methods in Engrg., 2, 335–352.
3.
Bradford, M. A. (1989). “Buckling strength of partially restrained I‐beams.” J. Struct. Engrg., ASCE, 115(5), 1272–1276.
4.
Bradford, M. A. (1990). “Design of beams with partial end restraint.” Proc., Institution of Civil Engineers, London, England, 89, Part 2, 163–181.
5.
Bradford, M. A., and Gilbert, R. I. (1989). “Nonlinear behavior of composite beams at service loads.” The Struct. Engr., 67(14), 263–268.
6.
Bradford, M. A., and Johnson, R. P. (1987). “Inelastic buckling of composite bridge girders near internal support.” Proc., Institution of Civil Engineers, London, England, 83, Part 2, 143–159.
7.
Bradford, M. A., and Trahair, N. S. (1981). “Distortional buckling of I‐beams.” J. Struct. Engrg. Div., ASCE, 107(2), 335–370.
8.
CAN3‐S16.1‐M78 steel structures for buildings—limit states design. (1978). Canadian Standards Association (CSA), Rexdale, Canada.
9.
Guide to stability design criteria for metal structures, (1988). 4th Ed., T.V. Galambos, ed., John Wiley and Sons, New York, N.Y.
10.
Hall, A. S., and Kabaila, A. P. (1986). Basic concepts of structural analysis. GreenwichSoft Pty. Ltd., Sydney, Australia.
11.
Hancock, G. J. (1984). “Structural buckling and vibration analyses on microcomputers.” Civil Engrg. Trans., Canberra, Australia, CE26(4), 327–332.
12.
Hancock, G. J., Bradford, M. A., and Trahair, N. S. (1980) “Web distortion and flexural‐torsional buckling.” J. Struct. Engrg. Div., ASCE, 106(7), 1557–1571.
13.
Hornbeck, R. W. (1975). Numerical Methods. Quantum Publishers Inc., New York, N.Y.
14.
Johnson, R. P., and Molenstra, N. (1990). “Strength and stiffness of shear connections for discrete U‐frame action in composite plate girders.” The Struct. Engr., 68(19), 386–392.
15.
Load and resistance factor design specification for structural steel buildings. (1986). American Institute of Steel Construction (AISC), Chicago, Ill.
16.
Rockey, K. C., Evans, H. R., Griffiths, D. W., and Nethercot, D. A. (1986). The finite element method, 2nd Ed., William Collins Sons and Co. Ltd, London, England.
17.
Steel, concrete and composite bridges, code of practice for design of steel bridges, B55400:Part 3. (1982). British Standards Institution (BSI). London, England.
18.
Structural use of steel in building, code of practice for design in simple and continuous construction, hot rolled sections. B55950:Part I. (1985). British Standards Institution (BSI), London, England.
19.
Trahair, N. S., and Bradford, M. A. (1988). The behaviour and design of steel structures, 2nd Ed., Chapman and Hall, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Jan 1, 1992
Published in print: Jan 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.