Methodology for Automation of Continuous Highway Bridge Design
Publication: Journal of Structural Engineering
Volume 117, Issue 9
Abstract
A methodology for complete automation of the conventional highway bridge design for minimum cost is presented. To make such an automated process practical and cost‐effective, efficient interface of three tasks—finite‐element analysis to generate influence surfaces, critical design force computation, and optimization is suggested. Experiments with the program developed based on the suggested methodology indicate that the cost of conventionally designed continuous steel plate girder highway bridges can be reduced by as much as 25%. Approximately 80% of the savings is due to the use of three‐dimensional finite‐element analysis and influence surfaces. About 20% of the savings accrues from the use of optimization. The methodology is general and can be applied to the design of any type of continuous multispan highway bridge.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aguilar, R. J., and Movassaghi, K. (1973). “Computerized optimization of bridge structures.” Computers and struct., 3, 429–442.
2.
Azad, A. K. (1978). “Economic design of homogeneous I‐beam.” J. Struct. Div., ASCE, 104(4), 637–648.
3.
Bathe, K. J., Wilson, E. L., and Peterson, P. E. (1974). “SAP IV—a structural analysis program for static and dynamic response of linear systems.” Report No. EERC 73‐11, Earthquake Engineering Research Center, Berkeley, Calif.
4.
Belegundu, A. D. (1986). “Interpreting adjoint equations in structural optimization.” J. Struct. Div., ASCE, 112(8), 1971–1976.
5.
McClure, R. M., and West, H. H. (1983). “Load factor design for highway bridges.” Report No. PTI 8314, Pennsylvania Transportation Institute, University Park, Pa.
6.
Memari, A. M. (1989). “Cost optimal design of multispan steel plate girder highway bridges,” thesis presented to the Pennsylvania State University, at University Park, Pa., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
7.
Memari, A. M., and West, H. H. (1989). “Cost optimal design of multispan steel plate girder highway bridges.” Report No. PTI 8936, Pennsylvania Transportation Institute, University Park, Pa.
8.
Memari, A. M., and West, H. H., (1991). “Computation of bridge design forces from influence surfaces.” Computers and Struct., 38(5 and 6), 547–556.
9.
Schmit, L. A., and Farshi, B. (1974). “Some approximation concepts for structural synthesis.” AIAA J., 12(5), 692–699.
10.
Standard plans for highway bridges. (1973). U.S. Dept. of Transportation, Federal Highway Administration, Washington, D.C.
11.
Structural specifications for highway bridges. (1983). 13th Ed., American Association of State Highway Transportation Officials (AASHTO), Washington, D.C.
12.
Vanderplaats, G. N. (1973). CONMIN—a FORTRAN program for the constrained function minimization, user's manual: NASA TM X‐62282, National Aeronautics and Space Administration (NASA), Washington, D.C.
13.
Vanderplaats, G. N., and Yoshida, N. (1984). “Efficient calculation of optimal design sensitivity.” AIAA Paper 84‐0855, American Institute of Aeronautics and Astronautics, Washington, D.C.
14.
Wang, C. H. (1976). “Optimum design of prestressed concrete members.” J. Struct. Div., ASCE, 96(7), 1525–1534.
15.
West, H. H., Mafi, M., Memari, A. M., and Corey, M. J. (1986). Development of cost‐effective bridge systems, phase II report: Research Project 80‐8A, Commonwealth of Pennsylvania, Dept. of Transp., University Park, Md.
16.
Zoutendijk, G. (1960). Method of feasible directions. Elsevier, Amsterdam, the Netherlands.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Sep 1, 1991
Published in print: Sep 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.