Buckling of Variable Cross‐Section Columns: Integral‐Equation Approach
Publication: Journal of Structural Engineering
Volume 117, Issue 8
Abstract
A semianalytical procedure is presented for the axial buckling of elastic columns with step‐varying profiles. Profiles with continuous variations can be approximated, to any desired degree of accuracy, by a series of step variations. The formulation leads to a general procedure that can be applied to any continuous or discontinuous profile regardless of the number of steps. Since the step changes of the profile are represented by distributions, the differential equation cannot be solved in the ordinary sense. The differential equation is therefore converted to an integral equation. The solution of the integral equation is obtained by polynomial functions. The formulation involves a significant amount of algebraic manipulations. This problem is alleviated by using a symbolic manipulation system to carry out the algebraic manipulations. The integral kernels are obtained for the different boundary conditions. Formulas for buckling loads for members with variable profiles and different boundary conditions can be obtained in terms of the section and profile parameters. The example problems present the solution of some common columns with variable cross sections. The procedure can be used to derive the elastic and geometric stiffness matrices for beam columns with variable cross sections as well as for other elements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arbabi, F. (1982). “A procedure for developing macro elements.” Proc. Int. Conf. on Finite Element Methods, Architectural Society of China, Shanghai, China.
2.
Arbabi, F. (1984). “A direct solution of the equivalent frame for two way slabs.” Comp. and Struct., 18(1), 159–164.
3.
Arbabi, F. (1986). “A singularity method for continuous beams with variable sections.” Proc. 1st East Asian Conf. on Struct. Engrg. and Constr., Asian Institute of Technology, 916–925.
4.
Arbabi, F. (1991). Structural analysis and behavior. McGraw‐Hill, New York, N.Y.
5.
Arbabi, F., and Li, F. (1990). “A macroelement for variable‐section beams.” Comput. and Struct., 37(4), 553–559.
6.
Cecchi, M. M., and Lami, C. (1977). “Automatic generation of stiffness matrices for finite element analysis.” Int. J. Numer. Meth. Engrg., 11(2), 396–340.
7.
Cochran, J. A. (1972). The analysis of linear integral equation. McGraw‐Hill, New York, N.Y.
8.
Dirac, P. A. N. (1926). “The physical interpretation of quantum mechanics.” Proc., Royal Society, London, England, A113.
9.
Erdélyi, A. (1962). Operational calculus and generalized functions. Holt, Rinehart and Winston, New York, N.Y.
10.
Gel'fand, I. M., and Shilov, G. E. (1964). Generalized functions. Vol. 1‐5, Academic Press, McLean, Va.
11.
Green, C. D. (1969). Integral equation methods. Barnes & Noble, New York, N.Y.
12.
Korncoff, A. R., and Fenves, S. J. (1979). “Symbolic generation of finite element stiffness matrices.” Comput. and Struct., 10.
13.
Li, F. (1989). “The development of macroelements with distributions,” dissertation presented to Michigan Technological University, at Houghton, Mich., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
14.
Liverman, T. P. G. (1964). Generalized functions and direct operational methods. Prentice‐Hall, Inc., Englewood Cliffs, N.J.
15.
Mikusinski, J. G. (1959). Operational calculus. Pergamon, Elmsford, N.Y.
16.
Noor, A. K., and Andersen, C. M. (1974). “Computerized symbolic manipulation in structural mechanics—Progress annd potential.” Comp. and Struct., 10(1—2), 95–118.
17.
Noor, A. K., and Andersen, C. M. (1981). “Computerized symbolic manipulation in nonlinear finite element analysis.” Comput. and Struct., 13, 379–403.
18.
Roach, G. F. (1970). Greens functions. Cambridge Univ. Press; New York, N.Y.
19.
Schwarts, L. (1950). Theorie des distribution. Hermann & Cie, Paris, France (in French).
20.
Stackgold, I. (1979). Green's functions and boundary value problems. John Wiley and Sons, New York, N.Y.
21.
Temple, G. (1955). “The theory of generalized functions.” Proc., Royal Society, London, England, A228, 175–190.
22.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability. 2nd Ed., McGraw‐Hill, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Aug 1, 1991
Published in print: Aug 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.