Sequence Effects on Stochastic Fatigue of Welded Joints
Publication: Journal of Structural Engineering
Volume 117, Issue 6
Abstract
The influence of small stress ranges on a recently proposed sequencedependent fatigue damage model is examined. The damage model is capable of including sequence effects by taking into account the interaction of neighboring cycles in predicting the fatigue damage accumulation. The parameters necessary for use of the damage model are obtained using a combined experimental and empirical approach. The model is modified here to ignore stress cycles below a truncation level that is consistent with the endurance limit of the specimens under constant amplitude loads. It is shown that with this modification, the damage model gives fatigue life predictions that compare very well with experimental results for a wide variety of stochastic loads. Additional experimental investigation with different specimen geometry and material is needed to further examine the validity of the proposed damage model and the extent to which the parameters needed to use this model are geometry‐ and material‐dependent.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Crandall, S. H., and Mark, W. D. (1963). Random vibration in mechanical systems. Academic Press, New York, N.Y.
2.
Hughes, P. J. (1989). “The influence of small stress ranges on stochastic fatigue of welded steel joints,” thesis presented to George Washington University at Washington, D.C., in partial fulfillment of the requirements for the degree of Master of Science.
3.
Kutt, T. V., and Bieniek, M. P. (1985). “Cumulative damage and fatigue life prediction.” Proc. 26th Structures, Structural Dynamics and Materials Conference, AIAA, New York, N.Y., 53–61.
4.
Matsuishi, M., and Endo, T. (1968). “Fatigue of metals subjected to varying stress.” Presented to the Japan Society of Mechanical Engineers Symposium, Fukuoka, Japan.
5.
Miner, M. A. (1945). “Cumulative damage in fatigue.” J. Appl. Mech., 12, A159‐A164.
6.
Palmgren, A. (1924). “Die Lebensdauer Von Kugallagern.” Ver. Deut. Ingr., 68, 339–341 (in German).
7.
Rice, S. O. (1944). “Mathematical analysis of random noise.” Bell System Tech. J., 23, 282–332
and Vol. 24, pp. 46–156.
Reprinted in Selected papers on noise and stochastic processes. (1952). N. Wax, ed., Dover, New York.
8.
Sarkani, S. (1986). “Experimental and analytical stochastic fatigue of welded steel joints,” thesis presented to Rice University at Houston, Tex., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
9.
Sarkani, S. (1989). “Effect of high frequency response on fatigue of offshore structures.” Structural material, John F. Orofino, ed., ASCE, New York, N.Y., 422–431.
10.
Sarkani, S. (1990). “Feasibility of auto‐regressive simulation model for fatigue studies.” J. Struct. Engrg., ASCE, 116(9), 2481–2495.
11.
Sarkani, S., and Lutes, L. D. (1988a). “Residual stress effects in fatigue of welded joints.” J. Struct. Engrg., ASCE, 114(2), 462–467.
12.
Sarkani, S., and Lutes, L. D. (1988b). “An experimental investigation of fatigue of welded joints under pseudo‐narrow‐band loadings.” J. Struct. Engrg., ASCE, 114(8), 1901–1916.
13.
Veers, P. S. (1987). “Fatigue crack growth due to random loading.” Sandia Report SAND 87–2039.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jun 1, 1991
Published in print: Jun 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.