Simple Model for Shear Capacity of Webs
Publication: Journal of Structural Engineering
Volume 117, Issue 2
Abstract
The ultimate load capacity of shear webs in a plate girder is modeled as the sum of the contributions of the web and the flanges. After initial elastic buckling due to a uniformly distributed shear stress, the web provides an increasing shear resistance by virtue of a changing shear stress distribution along the boundary, in which the shear stress remains at the critical stress in the compression corner, and increases toward the tension corner until shear yielding occurs. At this point, there is no stress normal to any boundary. As the web yields and distorts in the tension corners, the flanges are compelled to bend, and their resistance creates a normal force between the flange and web at the boundary, making an additional contribution to the shear capacity. Design expressions based on this model of the collapse mechanism give a direct prediction of the ultimate shear force, with no need for empirical adjustments.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ajam, W. (1986). “Finite element study of the post‐buckling behavior of plate girder panels under shear load,” thesis presented to Centre for Building Studies, Concordia University, at Montreal, Canada.
2.
Basler, K. (1961). “Strength of plate girders in shear,” Proc. No. 2967, Part I., ST. 7, ASCE, 151–180.
3.
Dubas, P., and Gehrin, E. (1986). “Behaviour and design of steel plated structures,” ECCS Publ. No. 44, TWG 8.3, 110–112.
4.
Fujii, T. (1971). “A comparison between the theoretical values and the experimental results for the ultimate shear strength of plate girders,” Proc., IABSE Colloquium, London, England.
5.
Höglund, T. (1971). “Simply supported long thin plate I‐girders without web stiffeners subjected to distributed transverse load,” Proc., IABSE Colloqium, London, England.
6.
Johnston, B. (1976). Guide to stability design criteria for metal structures. 3rd Ed., John Wiley & Sons, New York, N.Y.
7.
Komatsu, S. (1971). “Ultimate strength of stiffened plate girders,” Proc., IABSE Colloquium, London, England.
8.
Marsh, C. (1982). “Theoretical model for collapse of shear webs,” J. Engrg. Mech. Div., ASCE, 108(5), 819–832.
9.
Marsh, C. (1985). “Photoelastic study of postbuckled shear webs,” Canadian J. of Civ. Engrg., 12(2).
10.
Marsh, C., Ajam, W., and Ha, H.‐K. (1988). “Finite element analysis of postbuckled shear webs,” J. Struct. Engrg., ASCE, 114(7).
11.
Naranayan, R. (1983). Plated structures stability and strength. Applied Science Publishers.
12.
Nishino, F., and Okumwa, T. (1968). “Experimental investigation of strength of plate girders in shear,” Proc., 8th Congress, IABSE, New York, N.Y.
13.
Rockey, K. C., and Skaloud, M. (1968). “Influence of flange stiffness upon the load carrying capacity of webs in shear,” Proc., 8th Congress, IABSE, New York, N.Y.
14.
Rockey, K. C., and Skaloud, M. (1972). “The ultimate load behaviour of plate girders loaded in shear,” The Struct. Engr., 50(1), 29–47.
15.
Tang, K. H., and Evans, H. R. (1984). “Transverse stiffeners for plate girder webs—an experimental study,” J. Constr. Steel Res., 4.
16.
Timoshenko, S., and Gere, J. (1961). Theory of elastic stability. McGraw‐Hill Book Co., Inc., New York, N.Y.
17.
Vilnay, O., and Burt, C. (1988). “The shear effective width of aluminum plates,” Thin Walled Struct., 6(2).
18.
Wagner, H. (1929). “Ebene Blecktragen mit dunnen Stegblech,” Zeitschriftför Flugtechnik und Motorluftschijfart, 20.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Feb 1, 1991
Published in print: Feb 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.