Compound Strip Method for Folded Plates with Connecting Elements
Publication: Journal of Structural Engineering
Volume 117, Issue 1
Abstract
The compound strip method is extended to include folded plate structures with connecting elements. The potential energy formulation common to the finite strip method is retained, and a direct stiffness technique for incorporating connecting elements is developed. The stiffnesses of connecting elements attached to the plate system at discrete points are written with respect to local element degrees of freedom, which are then transformed into forms consistent with the nodal parameters of the finite strips. The additional stiffnesses of grounded columns and connecting elements are derived in this manner and added directly to the finite strip stiffness. The combined use of rotation transformations and displacement parameter interpolation to model connecting elements with arbitrary orientations has not previously been applied to the finite strip method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cheung, Y. K. (1976). Finite strip method in structural analysis. Pergammon Press, Elmsford, N.Y.
2.
Cheung, Y. K., and Swaddiwudhipong, S. (1978). “Analysis of frame shear wall structures using finite strip elements.” Proc. Inst. of Civil Engr., Part 2, 65, Sep., 517–535.
3.
Graves‐Smith, T. R., Gierlinski, J. T., and Walter, B. (1985). “A combined finite strip/finite element method for analysing thin‐walled structures.” J. Thin‐Walled Struct., 3, 163–180.
4.
Puckett, J. A., and Gutkowski, R. M. (1986). “Compound strip method for analysis of plate systems.” J. Struct. Engrg., 112(1), ASCE, 121–138.
5.
Puckett, J. A., and Lang, G. J. (1986). “Compound strip method for continuous sector plates.” J. Engrg. Mech., ASCE, 112(5), 498–514.
6.
Puckett, J. A., Wiseman, D. L., and Chong, K. P. (1987). “Compound strip method for the buckling analysis of continuous plates.” Thin‐Walled Struct., 5(1).
7.
Yoshida, H., and Maegawa, K. (1979). “The buckling strength of orthogonally stiffened plates under uniaxial compression.” J. Struct. Mech., 7(2), 161–191.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jan 1, 1991
Published in print: Jan 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.