Chance‐Constrained Optimization Model for Structural Design
Publication: Journal of Structural Engineering
Volume 117, Issue 1
Abstract
A mixed‐integer chance‐constrained optimization model is presented for structural design. The model incorporates the probabilistic nature of the loadings experienced throughout the life of the structure and can be used to investigate the trade‐offs between cost and the probability of failure. Design constraints are originally expressed as probability statements, in which the design parameters are considered to be random variables with established probability distributions. The chance constraints impose lower bounds on the likelihood or chance that specified failure criteria are exceeded for each structural member. Using the cumulative distribution function for each design parameter, the chance constraints may be expressed as deterministic equivalent constraints. Possible design solutions are limited to combinations of available standard sections using binary decision variables. An example is presented using a one‐story, one‐bay steel frame, and the results are compared with those obtained through conventional design procedures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Amir, H. M., and Hasegawa, T. (1989). “Nonlinear mixed‐discrete structural optimization.” J. Struct. Engrg., 115(3), 626–646.
2.
Ang, A. H.‐S., and Cornell, C. A. (1974). “Reliability basis of structural safety and design.” J. Struct. Div., 100(9), 1755–1769.
3.
Bloom, J. M. (1984). “Probabilistic fracture mechanics—A state of the art review.” Advances in Probabilistic Fracture Mech., 92, 1–19.
4.
Charnes, A., Cooper, W. W., Symonds, G. H. (1958). “Cost horizons and certainty equivalents: An approach to stochastic programming of heating oil.” Management Sci., 4(3), 235–263.
5.
Frangopol, D. M. (1985). “Structural optimization using reliability concepts.” J. Struct. Engrg., 111(11), 2288–2301.
6.
Frangopol, D. M., and Nakib, R. (1986). “Analysis and optimal design of nonde‐terministic structures under random loads.” Proc., 9th Conf. on Electronic Computation, ASCE, New York, N.Y., 483–493.
7.
Freudenthal, A. M., Garrelts, J. M., Shinozuka, M. (1966). “The analysis of structural safety.” J. Struct. Div., 92(1), 267–325.
8.
Freudenthal, A. M. (1947). “Safety of structures.” Trans., ASCE, 112, 125–180.
9.
Goh, C. J., and Wang, C. M. (1988). “Optimization of segment‐wise linear structures via optimal control theory.” Computers and Struct., 30(6), 1367–1373.
10.
Garey, M. R., and Johnson, D. S. (1979). Computers and intractability: A guide to the theory of NP‐completeness. W. H. Freeman and Company, San Francisco, Calif.
11.
Houck, M. H. (1979). “A chance constrained optimization model for reservoir design and operation.” Water Resour. Res., 15(5), 1011–1016.
12.
Hager, K., and Balling, R. (1988). “New approach for discrete structural optimization,” J. Struct. Engrg., 114(5), 1120–1134.
13.
Hantush, M. S., and Marino, M. A. (1989). “Chance constrained model for management of stream‐aquifer system.” J. Water Resour. Planning and Management, 115(3), 278–298.
14.
Meyers, V. J. (1983). Matrix analysis of structures. Harper and Row, New York, N.Y.
15.
Marsten, R. (1987). ZOOM user's manual: Release 4.0. Department of Management Information Systems, Univ. of Arizona, Tucson, Ariz.
16.
Revelle, C., Joeres, E., Kirby, W. (1969). “The linear decision rule in reservoir management and design. 1: Development of the stochastic model.” Water Resour. Res., 5(4), 767–777.
17.
“Structural safety—A literature review.” (1972). J. Struct. Div., 98(4), 845–884.
18.
Templeman, A. B. (1988). “Discrete optimum structural design.” Computers and Struct., 30(3), 511–518.
19.
Wagner, H. M. (1975). Principles of operations research. Prentice‐Hall, Inc., Englewood Cliffs, N.J.
20.
Yao, J. T. P., Kozin, F., Wen, Y.‐K., Yang, J.‐N., Schueller, G. I., Ditlevsen, O. (1986). “Stochastic fatigue, fracture and damage analysis.” Struct. Safety, 3, 231–267.
21.
Yao, J. T. P., and MacGregor, J. G. (1982). “Structural reliability theory and design codes.” Proc. of the ASCE Struct. Congress, New Orleans, La.
22.
Yao, J. T. P. (1978). “A general note on structural reliability.” Nuclear Struct. Engrg., 50(2), 145–147.
23.
Yao, J. T. P. (1974). “Fatigue reliability and design.” J. Struct. Div., 100(9), 1827–1836.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jan 1, 1991
Published in print: Jan 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.