Behavior of Concrete Panels Subjected to Axial and Lateral Loads
Publication: Journal of Structural Engineering
Volume 116, Issue 9
Abstract
This paper presents a study of the behavior of slender reinforced concrete panels, supported along their four sides, and subjected simultaneously to axial and lateral loads. The paper describes the numerical aspect of an ongoing research program that also includes experimental tests. The application of such structural elements in civil engineering construction is first presented, followed by the description of the finite element program used to perform the analysis. The validity of the numerical model is established by comparison with several experimental results performed on various types of structural elements. Finally, the results of a parametric study are presented to illustrate the effects of several geometric, loading, and edge constraint parameters on the behavior of panels supported on four sides and subjected to in‐plane and lateral loads. The type of edge restraints, the in‐plane load magnitude, slenderness, and loading history had significant effects on the capacity and ductility of the plates.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aghayere, A. O., and MacGregor, J. G. (1988). “Stability of concrete plates.” Structural Engineering Report No. 157, Dept. of Civ. Engrg., Univ. of Alberta, Edmonton, Canada.
2.
Aghayere, A. O., and MacGregor, J. G. (1990a). “Tests of reinforced concrete plates under combined in‐plane and transverse loads.” ACI Struct. J., 87 (in press).
3.
Aghayere, A. O., and MacGregor, J. G. (1990b). “Analysis of concrete plates under combined in‐plane and transverse loads.” ACI Struct. J., 87 (in press).
4.
Ahmad, S., Irons, B. S., and Zienkiewicz, O. C. (1968). “Curved thick shell and membrane elements with particular reference to axisymmetric problems.” Proc., 2nd Conf., on Matrix Methods in Structural Mechanics, Wright‐Patterson A.F. Base, Ohio, 539–572.
5.
MacGregor, J. G., Rizkalla, S. H., and Simmonds, S. H. (1979). “Cracking of reinforced and prestressed concrete wall segments.” Structural Engineering Report No. 82, Dept. of Civ. Engrg., Univ. of Alberta, Edmonton, Canada.
6.
Massicotte, B., Elwi, A. E., and MacGregor, J. G. (1988). “Analysis of reinforced concrete panels loaded axially and transversely.” Structural Engineering Report No. 161, Dept. of Civ. Engrg., Univ. of Alberta, Edmonton, Canada.
7.
Massicotte, B., MacGregor, J. G., and Elwi, A. E. (1990). “Tension stiffening model for planar reinforced concrete members.” J. Struct. Engrg., ASCE.
8.
Pawsey, S. F., and Clough, R. W. (1970). “Improved numerical integration of thick slab finite elements.” Int. J. Numer. Methods Engrg., 3, 575–586.
9.
Ramm, E. (1977). “A plate/shell element for large deflections and rotations.” Formulation and computational algorithms. K. J. Bathe, J. T. Oden, and W. Wunderlich, eds., U.S.‐Germany Symp., M.I.T., Cambridge, Mass., 264–293.
10.
Ramm, E. (1980). “Strategies for tracing the nonlinear response near limit points.” Nonlinear finite element analysis in structural mechanics: Proc. Europe‐U.S. Workshop, W. Wunderlich, E. Stein, and K. J. Bathe, eds., Ruhr Universitat, Bochum, West Germany, 63–89.
11.
Rizkalla, S. H., Hwang, L. S., and El Shahawi, M. (1983). “Transverse reinforcement effect on cracking behaviour of R.C. members.” Can. J. Civ. Engrg., 10(4), 566–581.
12.
Rostásy, F. S., Koch, R., and Leonhart, F. (1976). “Zur mindestbewehrung für Zwang von aussenwänden aus Stahlleichbeton.” Deutscher Ausschuss für Stahlbeton, 267, 1–83(in German).
13.
Stegmüller, H., et al. (1983). “Theoretische grundlagen zum FE‐programm system NISA 80.” Mitteilung Nr. 1, Institut für Baustatik der Universität Stuttgart, Stuttgart, West Germany (in German).
14.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability. McGraw‐Hill, New York, N.Y.
15.
Vecchio, F. J., and Collins, M. P. (1982). “The response of reinforced concrete to in‐plane shear and normal stresses.” Publication No. 82‐03, Dept. of Civ. Engrg., Univ. of Toronto, Toronto, Canada.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Sep 1, 1990
Published in print: Sep 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.