Static Deformations of Bridges From Quick‐Release Dynamic Experiments
Publication: Journal of Structural Engineering
Volume 116, Issue 8
Abstract
This paper illustrates the application of a new method for performing baseline corrections on accelerograms generated by the quick‐release method. These accelerograms are produced when highway bridges are subjected to dynamic excitiations by initially deforming the structure and subsequently quick‐releasing the loads causing the deformations. In the past, the displacements caused by the quick‐release loads have not been recovered because an adequate correction procedure was not available. A baseline‐correction method was developed such that the step‐function character of the quick‐release baseline is preserved. This feature allows the complete static deformation state to be recovered by integrating the accelerograms. The power of the method is demonstrated by applying it to a suite of quick‐release data obtained during full‐scale field tests of the Meloland Road Overcrossing located near El Centro, California. As a result, complete static deformations of this bridge are obtained as a by‐product of the dynamic experiments.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brady, A. G. (1966). “Studies of response to earthquake ground motion.” Earthquake Engrg. Res. Lab., California Inst. of Tech., Pasadena, Calif.
2.
Brady, A. G., Perez, V., and Mark, P. M. (1982). “Digitization and processing of main‐shock ground‐motion data from the U.S. geological survey accelerograph network.” Professional Paper 1254, U.S. Geological Survey, Menlo Park, Calif.
3.
Douglas, B. M. (1976). “Quick‐release pullback testing and analytical seismic analysis of a six span composite girder bridge.” Report No. FHWA‐RD‐76‐173, Federal Highway Administration, Ofc. of Res. and Development, Washington, D.C.
4.
Douglas, B. M., and Richardson, J. (1984). “Maximum amplitude tests of a highway bridge.” Proc. 8th World Conf. on Earthquake Engrg., Earthquake Engineering Research Institute and International Association for Earthquake Engineering, 6.
5.
Douglas, B. M., and Reid, W. H. (1982). “Dynamic tests and system identification of bridges.” J. Struct. Div., ASCE, 108(10), 2295–2312.
6.
Hudson, D. E. (1979). Reading and interpreting strong motion accelerograms. Earthquake Engrg. Res. Inst.
7.
Iwan, W. D., Moser, M. A., and Peng, C. Y. (1985). “Some observations on strong‐motion earthquake measurement using a digital accelerograph.” Bulletin of the Seismological Society of America, 75, 1225–1246.
8.
Nath, B. (1990). “A methodology for integrating quick‐release accelerograms to displacements,” thesis presented to the University of Nevada, at Reno, Nev., in partial fulfillment of the requirements for the degree of Master of Science.
9.
Rojahn, C, et al. (1982). “Mainshock strong‐motion records from Meloland road‐interstate highway 8 overcrossing, the Imperial Valley California, Earthquake of Oct. 15, 1979.” Geological Survey Professional Paper 1254, 337–383.
10.
Trifunac, M. D., and Lee, V. (1973). “Routine computer processing of strong motion accelerograms.” Report No. 73‐03, Earthquake Engrg. Res. Lab., California Inst. of Tech., Pasadena, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Aug 1, 1990
Published in print: Aug 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.