Concrete Box Sections under Biaxial Bending and Axial Load
Publication: Journal of Structural Engineering
Volume 116, Issue 3
Abstract
A computer program is developed for ultimate strength design of concrete box sections subjected to biaxial bending and axial load. The distribution of steel reinforcement is assumed to be symmetric in the section. In the analysis the equilibrium equations are expressed in terms of the three unknowns describing the location of the modified axis and the total reinforcement area within the cross section, which leads to three simultaneous nonlinear algebraic equations that are solved by a procedure based on the Newton-Raphson method. It is observed that the iterative algorithm used in the program converges rapidly for many different problem tested, and execution time of the program is small; hence the program can be run many times with different reinforcement arrangements and the most suitable reinforcement pattern among them can be chosen.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brondum‐Nielsen, T. (1985). “Ultimate flexural capacity of cracked polygonal concrete sections under biaxial bending.” ACI J., 82(6), 863–869.
2.
Brondum‐Nielsen, T. (1986). “Ultimate flexural capacity of fully prestressed, partially prestressed, arbitrary concrete sections under symmetric bending.” ACI J., 83(1), 29–35.
3.
Brondum‐Nielsen, T. (1987). “Ultimate flexural capacity of cracked polygonal concrete sections with circular holes under biaxial bending.” ACI Struct. J., 84(3).
4.
“Building code requirements for reinforced concrete.” (1983). Report No. 318‐83, ACI, Detroit, Mich.
5.
Dundar, C. (1988). “Computer aided ultimate strength design of columns subject to biaxial bending.” Les Annales de l'Enit, Tunis, Tunisia, 2(2), 57–69.
6.
Hsu, C. T. (1985). “Biaxially loaded L‐shaped reinforced concrete columns.” J. Struct. Engrg., ASCE, 111(12), 2576–2598.
7.
Hsu, C. T., and Mirza, M. S. (1973). “Structural concrete—biaxial bending and compression.” J. Struct. Engrg., ASCE, 99(2), 285–290.
8.
Park, R., and Paulay, T. (1975). Reinforced concrete structures. John Wiley and Sons, Inc., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Mar 1, 1990
Published in print: Mar 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.