Analysis Procedure for Ribbed and Grid Plate Systems Used for Bridge Decks
Publication: Journal of Structural Engineering
Volume 116, Issue 2
Abstract
A methodology to develop analytically the deflection function characterizing the behavior of bridge decks in which the concrete slab rests on top of a network of steel beams is presented. The systems analyzed are categorized as ribbed plate systems, where the beams are parallel to the longitudinal span of the decking, and grid plate systems, where the slab is supported on a beam grid system. The plate systems are analyzed using an energy‐based approach, where polynomial functions are used to model deflections and moments in the slab. In the analysis only plates that are simply supported on two edges and that are subjected to particular types of uniformly distributed and concentrated load patterns are considered. Sufficient cases are analyzed, and prediction equations for maximum bending moments and deflections of the slab are developed using regression analysis procedure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adel Malek, R. A. (1969). “Design formulas for bridge decks,” thesis presented to the North Carolina State University, at Raleigh, N.C., in partial fulfillment of the requirements for the degree of Master of Science.
2.
Bathe, K. J., Wilson, E. L., and Peterson, F. E. (1974). “A structural analysis program for static and dynamic response of linear system.” SAP IV, Apr., Berkeley, Calif.
3.
Cheung, Y. K. (1968). “Finite strip method in analysis of elastic plates with two opposite sides simply supported ends.” Proc., Inst. of Civ. Engrs., 40, 7051–7057.
4.
Cornelius, W. (1952). “Die berechnung der ehener flächentragwerke mit hilfe der theorie der orthogonal anistotropen platten.” Der stahibau, 2, 21–26, (in German).
5.
Dean, D. L., and Omid'varen, C. (1969). “Analysis of ribbed plates.” J. Struct. Div., ASCE, 95(3), 411–425.
6.
Elmeged, A. A. (1973). “Analysis of orthotropic plate system,” thesis presented to the West Virginia University, at Morgantown, W.V., in partial fulfillment of the requirements for the degree of Master of Science.
7.
Gangarao, H. V. S., Elmeged, A. A., and Chaudhary, V. K. (1975). “Macroapproach for ribbed and grid plate systems.” J. Engrg. Mech., ASCE, 101(1), 25–39.
8.
Guyon, Y. (1946). “Calcul des ponts larges a poutres multiples solidarisées por les entretoises.” Ann. Ponts et Chausées, 116(5), 553–612 (in French).
9.
Huber, M. T. (1923). “Die theorie des kreuzweise bewehrten eisenbetonplatten.” Der Bauingenieur, 4, 354–392 (in German).
10.
Manual of steel construction. (1980). Eighth Ed., Am. Inst. of Steel Constr., New York, N.Y.
11.
Massonet, C. (1950). “Method of calculations for bridges with several longitudinal beams taking into account their torsional resistance.” Int. Assoc. for Bridges and Struct. Engrg., 147–182.
12.
Rajapaksa, Y. (1985). “Formulation of analysis and design procedures for ribbed and grid plate systems used for highway bridges,” thesis presented to the University of Oklahoma, at Norman, Okla., in partial fulfillment of the requirements for the degree of Master of Science.
13.
SAS users guide. SAS Institute, Inc., Cary, N.C.
14.
Standard specifications for highway bridges. Thirteenth edition. (1983). Association of State Highway and Transportation Officials, Washington, D.C.
15.
Waltz, J. E., Fultin, R. E., and Cyrus, M. J. (1968). “Accuracy and convergence of finite element approximations.” Proc., Second Conf. Matrix Methods of Struct. Mech., AFFDL‐TR‐68‐150, Dayton, Ohio, 95–1027.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Feb 1, 1990
Published in print: Feb 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.