Elastic, Lateral‐Torsional Stability of Beams: General Considerations
Publication: Journal of Structural Engineering
Volume 116, Issue 2
Abstract
The paper presents a more accurate solution for the elastic, lateral‐torsional buckling of I‐beams under unequal end moments which incorporates accurately the effects of moment gradient, lateral end restraint, and beam slender‐ness. Since lateral‐torsional buckling involves warping and torsional modes of deformation, the proposed approach treats the problem as the superposition of two hypothetical cases of beam buckling corresponding to zero warping and zero torsional rigidity. The effects of moment gradient and lateral end restraints are considered independently on each mode and then superimposed to obtain the critical moment of the combined mode. The proposed analytical model is used to derive new parametric expressions for moment modification and effective length factors as design aids.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Austin, W. J. (1961). “Strength and design of steel beam‐column.” J. Struct. Div., ASCE, 87(4), 1–32.
2.
Barsoum, R. S., and Gallagher, R. H. (1970). “Finite element analysis of torsional and torsional‐flexural stability problem.” Int. J. Num. Methods in Engrg., 2(3), 335–352.
3.
Bleich, F. (1952). Buckling strength of metal structures. McGraw‐Hill Book Co., New York, N.Y.
4.
Cuk, P. E., and Trahair, N. S. (1981). “Elastic buckling of beam‐columns.” Civ. Engrg. Trans., Inst. of Engineers, Australia, CE23(3), 166–171.
5.
Horne, M. R. (1954). “The flexural‐torsional buckling of member of symmetrical I‐section under combined thrust and unequal terminal moments.” Quart. J. Mech. Appl. Math., 7(4), 410–426.
6.
Massonnet, C. E. (1976). “Forty years of research on beam‐column in steel.” Solid Mech. Archives, 1(1), 27–157.
7.
Nethercot, D. A., and Rockey, K. C. (1971). “A unified approach to the elastic lateral buckling of beams.” The Struct. Engr., 49(7), 321–330.
8.
Nethercot, D. A., and Rockey, K. C. (1973). “Lateral buckling of beams with mixed end conditions.” The Struct. Engr., 51(4), 133–138.
9.
Pandey, M. D. (1988). “Lateral stability of beams in computer aided design.” Thesis presented to the University of Waterloo, at Waterloo, Canada, in partial fulfillment of the requirements for the degree of Master of Science.
10.
Pandey, M. D., and Sherboume, A. N. (1989). “An effective length approach in limit states design of beams.” Proc., Second East Asia Pacific Conf. Struct. Engrg. Constr., Chiang Mai, Thailand, 1375–1380.
11.
Salvadori, M. G. (1955). “Lateral buckling of I‐beams.” Trans. ASCE, 120, 1165–1177.
12.
Sherbourne, A. N., and Pandey, M. D. (1989). “Elastic, lateral‐torsional stability of beams: Moment modification factor.” J. Const. Steel Res., 13(4), 337–356.
13.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability. McGraw‐Hill Book Co., New York, N.Y.
14.
Worthington, P. M. (1954). “Elastic stability of straight I‐beam subjected to complex loads.” Proc. I.C.E., 3(1), 46–65.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Feb 1, 1990
Published in print: Feb 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.