Prestress Level in Stress‐Laminated Timber Bridges
Publication: Journal of Structural Engineering
Volume 116, Issue 11
Abstract
An important consideration in stress‐laminated timber bridges is the retention of the prestress force in the deck. This paper presents the results of an experimental and analytical investigation of the prestress level in a prototype stress‐laminated timber‐bridge deck. Loss of prestress force can be minimized using disc springs on the tensioning rods that reduce the effective stiffness of the prestressing system. The disc springs also provide a practical technique for measuring prestress force. It is also shown that the initial loss of prestress force due to wood creep can be accurately modeled as a power function of time and that this model can be used for predictive purposes. The effect of temperature changes on the prestress level is investigated, and it is demonstrated that this is a significant effect that should be included in future design specifications. Finally, the performance of the distribution channel is evaluated analytically and a performance parameter is identified.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barnes, J. W. (1988). Statistical analysis for engineers. Prentice Hall, N.J.
2.
Bodig, J., and Jayne, B. A. (1982). Mechanics of wood and wood composites. Van Nostrand Reinhold Co., New York, N.Y.
3.
Brungraber, R., et al. (1986). “Timber bridges: Part of the solution for rural America.” Transp. Res. Rec., 1106, 131–139.
4.
Csagoly, P. F., and Taylor, R. J. (1980). “A structural wood system for highway bridges.” Struct. Res. Report SRR‐80‐05, Ontario Ministry of Transp. and Communications, Downsview, Ontario, Canada.
5.
DiCarlantonio, G. (1988). “Prestressed timber bridges: An experimental study,” thesis presented to Pennsylvania State University, at University Park, Pa., in partial fulfillment of the requirements for the degree of Master of Science.
6.
Greenberg, M. D. (1978). Foundations of applied mathematics. Prentice Hall, En‐glewood Cliffs, N.J.
7.
Herubin, C. A., and Marotta, T. W. (1987). Basic construction materials methods and testing. Prentice Hall, Englewood Cliffs, N.J.
8.
Oliva, M. G., and Dimakis, A. (1988). “Behavior of stress‐laminated timber highway bridge.” J. Struct. Engrg., ASCE, 114(8), 1850–1869.
9.
Ontario highway bridge design code. (1983). 2nd Ed., Ontario Ministry of Transp. and Communication, Downsview, Ontario, Canada.
10.
Standard specifications for highway bridges. (1983). 13th Ed., Am. Assoc, of State Highway and Transp. Officials, Washington, D.C.
11.
Taylor, R. J., and Csagoly, P. F. (1978). “Transverse post‐tensioning of longitudinally laminated timber bridge decks.” Transp. Res. Rec, 665, 236–244.
12.
Taylor, R. J., Batchelor, B. D., and VanDalen, K. (1983). “Prestressed wood bridges.” Struct. Res. Report SRR‐83‐01, Ontario Ministry of Transp. and Communications, Downsview, Ontario, Canada.
13.
Verna, J. R., et al. (1984). “Timber bridges: Benefits and costs.” J. Struct. Engrg., ASCE, 110(7), 1563–1571.
14.
Weller, C. G. (1989). “Timber bridge technology.” AASHTO Quarterly, 68(1), 16–17.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Nov 1, 1990
Published in print: Nov 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.