Limit State Sensitivity of Structural Frames Subjected to Cyclic Forces
Publication: Journal of Structural Engineering
Volume 116, Issue 10
Abstract
The reliability of structural systems often is analyzed under the assumption that the system limit states are not dependent on load path. Although brittle systems are known to be load‐path dependent, limit states for ductile frames usually are assumed to be independent of the manner in which the loads are applied. In this study, the dependence of limit states of a single‐story and multi‐story ductile frame on load path is investigated. For certain cyclic load cases, the strength of the structure decreases significantly and load‐path dependence is apparent. It is observed that this can be related to a ratcheting type phenomenon of the structure, and depends on the load sequencing and the degree of nonlinear behavior within each cycle. A load‐path‐independent lower bound limit state is formulated using shakedown theory. Reliability analyses of the different limit states are performed to determine the importance of load‐path dependence on computed system reliability.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS user's manual version 4.6. (1987). Hibbitt, Karlsson & Sorensen, Inc., Providence, R.I.
2.
Ang, A. H.‐S., and Ma, H.‐F. (1981). “On the reliability of structural systems.” Struct. Safety and Reliability, Proc. 3rd Int. Conf. on Struct. Safety and Reliablity, Elsevier Sci. Publishing Co., Amsterdam, The Netherlands, 295–314.
3.
Augusti, G., and Baratta, A. (1973). “Limit and shakedown analysis of structures with stochastic strengths.” Proc. SMiRT‐2, 5, Paper M7/8, Berlin, W. Germany.
4.
Bennett, R. M., and Ang, A. H.‐S. (1986). “Formulations of structural system reliability.” J. Engrg. Mech., ASCE, 112(11), 1135–1151.
5.
Corotis, R. B., and Nafday, A. M. (1989). “Structural system reliability using linear programing and simulation.” J. Struct. Engrg., ASCE, 115(10), 2435–2447.
6.
Ditlevsen, O. (1988). “Probabilistic statics of discretized ideal plastic frames.” J. Engrg. Mech., ASCE, 114(12), 2093–2114.
7.
Ditlevsen, O., and Bjerager, P. (1986). “Methods of structural system reliability.” Struct. Safety, 3(3), 195–229.
8.
Ellingwood, B. R., et al. (1982). “Probability based load criteria: Load factors and load combinations.” J. Struct. Div., ASCE, 108(5), 978–997.
9.
Galambos, T. V., et al. (1982). “Probability based load criteria: Assessment of current design practice.” J. Struct. Div., ASCE, 108(5), 959–977.
10.
Grimmelt, M. J., and Schuëller, G. I. (1982). “Benchmark study on methods to determine collapse failure probabilities of redundant structures.” Struct. Safety, 1(2), 93–106.
11.
Guralnick, S. A., et al. (1988). “Energy method for incremental collapse analysis of framed structures.” J. Struct. Engrg., ASCE, 114(1), 31–49.
12.
Karamchandani, A. (1987). “Structural system reliability analysis methods.” Report No. 83, John A. Blume Earthquake Engrg. Ctr., Stanford Univ., Palo Alto, Calif.
13.
König, J. A. (1987). Shakedown of elastic‐plastic structures. Elsevier, Amsterdam, the Netherlands.
14.
Lin, T. S., and Corotis, R. B. (1985). “Reliability of ductile systems with random strengths.” J. Struct. Engrg., ASCE, 111(6), 1306–1325.
15.
“Load and resistance factor design specification for structural steel buildings.” Manual of Steel Constr.: LRFD, 1st Ed., Amer. Inst. of Steel Constr., Chicago, Ill.
16.
Melchers, R. E. (1987). Structural reliability—Analysis and prediction. Halsted Press, New York, N.Y.
17.
“Minimum design loads for buildings and other structures.” (1982). ANSI A58, Amer. Nat. Standards Inst., New York, N.Y.
18.
Rashedi, R., and Moses, F. (1988). “Identification of failure modes in system reliability.” J. Struct. Engrg., ASCE, 114(2), 292–313.
19.
Soltani, M., and Corotis, R. B. (1987). “Reliability of random structural systems and load space reduction.” J. Struct. Engrg., ASCE, 113(10), 2145–2159.
20.
“Specification for the design, fabrication and erection of structure steel for buildings.” Manual of Steel Construction, 8th Ed., Amer. Inst. of Steel Constr., Chicago, Ill.
21.
Wang, T. Y. (1989). “Load path dependence in structural frames subjected to fluctuating forces,” thesis submitted to The Johns Hopkins University, at Baltimore, Md., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Oct 1, 1990
Published in print: Oct 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.