Control of Random Yield‐Strength for Mechanism‐Based Seismic Design
Publication: Journal of Structural Engineering
Volume 116, Issue 1
Abstract
A weak‐beam‐strong‐column philosophy is generally recommended for the design of earthquake‐resistant multistory structures, because the associated overall collapse mechanism exhibits a high ductility against a strong ground motion. Some uncertainty factors, however, are considered to impair the overall collapse mechanism, such as randomness in members' yield strengths, randomness in earthquake motions, and randomness in mass‐distribution over the height of the building. Static and dynamic simulations on the inelastic performance of a six‐story rigid frame using a Monte Carlo method showed that the randomness in the yield strengths has a predominant influence on the failure mechanism and consequently on the system ductility. In practice, weak‐beam‐strong‐column structures will be realized only when the randomness in the yield strengths is reduced by means of a higher quality control in manufacturing and construction processes, otherwise a considerably high margin should be provided to column strengths.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akiyama, H. (1981). “Damage distribution law of steel rigid frames under earthquakes.” Trans. of Arch. Inst. of Japan, 309, Nov., Transactions of the Architectural Institute of Japan, Tokyo, 53–59 (in Japanese).
2.
Anderson, J. C., and Gupta, R. P. (1972). “Earthquake resistant design of unbraced frames.” J. Struct. Div., ASCE, 98(11), 2523–2539.
3.
Aoki, H., and Masuda, M. (1985). “Statistical investigation on mechanical properties of structural steel based on coupon tests.” Journal of Structural and Construction Engineering, Architectural Institute of Japan, Tokyo, Japan, 358, Dec., 94–105, (in Japanese).
4.
Clough, R. W., and Penzien, J. (1982). Dynamics of structures. McGraw‐Hill Book Company, International Student Edition, 6th Printing, Singapore, 597–602.
5.
Ellingwood, B., et al. (1980). “Development of a probability based load criterion for American national standars A58.” NBS Special Publication 577, U.S. Department of Commerce, Washington, Jun.
6.
Galambos, T. V., and Ravindra, M. K. (1978). “Properties of steel for use in LRFD.” J. Struct. Div., ASCE, 104(9), 1459–1468.
7.
Kuwamura, H. (1988a). “Effects of yield ratio on the ductility of high‐strength steels under seismic loading.” Proc. Struct. Stability Res. Council, Apr., 201–210.
8.
Kuwamura, H. (1988b). “Limit states and failure criteria for earthquake resistant structures.” Journal of Structural and Construction Engineering, Architectural Institute of Japan, Tokyo, Japan, 387, May, 45–54, (in Japanese).
9.
Kuwamura, H., and Galambos, T. V. (1986). “Reliability analysis of steel building structures under earthquakes.” Struct. Engrg. Report 86‐01, Univ. of Minnesota, Minneapolis, Minn., May.
10.
Kuwamura, H., and Galambos, T. V. (1988). “Earthquake load effect for structural risk assessment.” Proc. 9th World Conference on Earthquake Engrg., Aug., Japan Association for Earthquake Disaster Prevention, Tokyo, Japan, 5, 313–318.
11.
Kuwamura, H., and Sasaki, M. (1987). “Effects of randomness in yield point on the ductility of a steel rigid frame.” Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Tokyo, Japan, Oct., 949–950 (in Japanese).
12.
Kuwamura, H., and Sasaki, M. (1988a). “Effect of randomness in members' yield strengths on the failure mechanism of multi‐story rigid frames.” Journal of Structural Engineering, 34B, Architectural Institute of Japan, Tokyo, Japan, Mar., 113–123, (in Japanese).
13.
Kuwamura, H., and Sasaki, M. (1988b). “Effects of randomness in members' yield strengths on the dynamic failure mechanism of a steel rigid frame.” Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Tokyo, Japan, Oct., Vol. B, 245–246 (in Japanese).
14.
Park, R., and Paulay, T. (1975). Reinforced Concrete Structures. John Wiley and Sons, New York, N.Y., 545–609.
15.
“Tentative specification for the mechanical properties of high‐tensile‐strength steels used for building structures.” (1988). Iron and Steel Institute of Japan, Mar., (in Japanese).
16.
Walpole, W. R., and Shepherd, R. (1969). “Elasto‐plastic seismic response of reinforced concrete frame.” J. Struct. Div., ASCE, 95(10), 2031–2055.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jan 1, 1990
Published in print: Jan 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.