Shear Strength of Reinforced Concrete Plates and Shells Determined by Finite Element Analysis Using Layered Elements
Publication: Journal of Structural Engineering
Volume 115, Issue 5
Abstract
Transverse shear failures of reinforced concrete plates and shells are analyzed using a layered shell element that has been modified to more accurately model shear behavior. The transverse shear stress distribution through the shell thickness is obtained by equilibrium relations, Three‐dimensional failure criteria are used to predict transverse shear failure. The element is able to predict shear failures for plates and shells with and without shear reinforcement. A new cracking model based on crack friction, shear dilatancy, and crack surface deformability is used for some of the results. The analytical results are compared with experimental results for beams, plates, and shells subjected to concentrated forces. Good agreement between analysis and experiment is obtained for plates with and without shear reinforcement and for shells without reinforcement. An improved multidirectional cracking model is needed for shells with shear reinforcement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bresler, B., and Scordelis, A. C. (1966). “Shear strength of reinforced concrete beams.” Series I—SESM Report No. 100‐13, June 1961, Series II—SESM Report No., 65‐1, June, Dept. of Civ. Engrg., Univ. of California, Berkeley Calif.
2.
Chan, E. (1982). “Nonlinear geometric, material and time dependent analysis of reinforced concrete shells with edge beams,” thesis presented to the University of California, at Berkeley, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
3.
deBorst, R., and Nauta, P. (1985). “Non‐orthogonal cracks in smeared finite element models.” Eng. Comput., 2.
4.
Krahl, N. W., Khachaturian, N., and Siess, C. P. (1967). “Stability of tensile cracks in concrete beams.” J. Struct. Div., ASCE, 93(ST1).
5.
Kupfer, H., et al. (1978). “Triaxial stress‐strain relationship for concrete.” ACI J., 75.
6.
Murray, D. W. (1979). “Octahedral‐based incremental stress‐strain matrices.” J. Engrg. Mech. Div., ASCE.
7.
Ottosen, N. S. (1977). “A failure criterion for concrete.” J. Engrg. Mech. Div., ASCE, 103.
8.
Paulay, T., and Loeber, P. (1974). “Shear transfer by aggregate interlock.” ACI SP‐42, 1, 1–16.
9.
Walraven, J. C. (1980). “Aggregate interlock: A theoretical and experimental analysis.” Thesis presented to the Delft Univ. of Tech., Delft, The Netherlands, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: May 1, 1989
Published in print: May 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.