Finite Element Model for RHS Double Chord K‐Joints
Publication: Journal of Structural Engineering
Volume 115, Issue 5
Abstract
A finite element elastic‐plastic model for separated double chord gap K‐joints of steel rectangular hollow sections (RHS), is presented. The model treats a single chord member as composed of a plate representing the inner web and a channel depicting the top and bottom flanges and the outer web, respectively. Triangular and rectangular flat shell elements are used to discretize the inner web plate, whereas plane stress elements are employed for the branch members. The channel consists of a grillage of beam elements. The analysis extends beyond the elastic limit and accounts for strain hardening and material nonlinearity. A comparison of theoretical predictions with the experimental results of 12 K‐joint specimens of a previous study shows fair agreement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bathe, K.‐J. (1982). Finite element procedures in engineering analysis. Prentice‐Hall, Englewood Cliffs, N.J.
2.
Bazeley, G. P., et al. (1965). “Triangular elements in plate bending‐conforming and non‐conforming solutions.” Proc., Conf. on Matrix Methods in Struct. Mech., Wright‐Patterson Air Force Base, Ohio, 547–572.
3.
Korol, R. M. (1986). “Double chords as an alternate in tubular trusses.” J. Struct. Engrg., ASCE, 112(12), 2665–2678.
4.
Korol, R. M., and Chidiac, M. A. (1980). “K‐Joints of double chord square hollow sections.” Can. J. Civ. Eng., 7(3), 523–529.
5.
Korol, R. M., and Mirza, F. A. (1982). “Finite element analysis of RHS T‐joints.” J. Struct. Engrg., ASCE, 108(9), 2081–2098.
6.
Korol, R. M., Mirza, F. A., and Chiu, T. C. (1983). “An experimental investigation of double chord HSS trusses.” Can. J. Civ. Engrg., 10(2), 248–260.
7.
Korol, R. M., Mirza, F. A., and Chiu, T. C. (1983). “Predicting the behaviour of HSS double chord trusses—A comparison with test results.” Can. J. Civ. Engrg., 10(2), 261–270.
8.
Mirza, F. A., Shehata, A. A., and Korol, R. M. (1984). “Modelling of double chord rectangular hollow section T‐joints by finite element methods.” Comp. and Struct., 19(5/6), 829–838.
9.
Mitri, H. S. (1984). “Separated double chord RHS joints,” thesis presented to McMaster University, at Hamilton, Canada, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
10.
Packer, J. A. (1983). “Developments in the design of welded HSS truss joints with RHS chords.” Can. J. Civ. Eng., 10(1), 92–103.
11.
Packer, J. A., Davies, G., and Coutie, M. G. (1982). “Ultimate strength of gapped joints in RHS trusses.” J. Struct. Engrg., ASCE, 108(2), 411–429.
12.
Wardenier, J. (1982). Hollow section joints. Delft Univ. Press, Delft, The Netherlands.
13.
Zienkiewicz, O. C. (1977). The finite element method. McGraw‐Hill Book Co., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: May 1, 1989
Published in print: May 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.