Signal Separation Method for Tower Mode Shape Measurement
Publication: Journal of Structural Engineering
Volume 115, Issue 3
Abstract
Vibration shapes of the fundamental modes of eight‐legged, K‐braced, offshore towers undergo significant changes when important braces are damaged. These changes, measurable at deck‐level, provide valuable clues for detecting damage. Because of the small difference between vibration frequencies of the two fundamental translational modes in these towers, the mode shapes are difficult to measure. A simple method is presented which solves this difficulty. The method uses transient acceleration response records that can be produced by different excitation procedures, and no knowledge of the input that causes the excitation is necessary. The finite Fourier transform of such records is examined, and its important properties are pointed out for low damping. Based on these properties, procedures are set forth by which mode shape data can be retrieved from closely spaced peaks in response spectra. The retrieval is done by separating these peaks from each other. Applications of the method in a numerical experiment, and in a physical experiment on a l/50th scale offshore platform model, are presented. Application of the method to full‐scale towers is discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allemang, R. J. (1983). “Experimental modal analysis.” Modal Testing and Model Refinement, ASME (AMD), 59, Nov., 1–29.
2.
Asher, G. W. (1958). “A method for normal mode excitation utilizing admittance measurements.” Proc., National Specialists Meeting on Dynamics and Aeroelasticity, Institute of Aerospace Sciences, Fort Worth, Tex., 69–76.
3.
Bendat, J. S. (1971). Random data: Analysis and measurement procedures. John Wiley and Sons, Inc. New York, N.Y.
4.
Burke, B. G., Sundararajan, C., and Safaie, F. M. (1980). “Characterization of ambient vibration data by response shape vectors.” Proc., Offshore Technology Conference, OTC paper 3862, 63–76.
5.
Campbell, R. B., and Vandiver, K. J. (1980). “The estimation of natural frequencies and damping ratios of offshore structures.” Proc., Offshore Technology Conference, OTC paper 3861, Houston, Tex., 53–61.
6.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures. McGraw‐Hill, New York, N.Y.
7.
Coppolino, R. N., and Rubin, S. (1980). “Detectability of structural failures in offshore platforms by ambient vibration monitoring.” Proc., Offshore Technology Conference, OTC paper 3865, Houston, Tex., 101–110.
8.
Duggan, D. M., Wallace, E. R., and Caldwell, S. R. (1980). “Measured and predicted vibration behavior of Gulf of Mexico platforms.” Proc., Offshore Technology Conference, OTC paper 3864, Houston, Tex., 91–100.
9.
Ewins, D. J. (1979). “Whys and wherefores of modal testing.” J. Soc. Envir. Engrs., Sept., 3–15.
10.
Gundy, W. E., Scharton, T. D., and Thomas, R. L. (1980). “Damping measurements on an offshore platform.” Proc., Offshore Technology Conference, OTC paper 3863, Houston, Tex., 77–90.
11.
Ibanez, P. (1976). “Force appropriation by extended Asher's method.” SAE paper 760873, Society of Automotive Engineers, Inc., Warrendale, Pa.
12.
Ibrahim, S. R. (1978). “Modal confidence factor in vibration testing.” Shock and Vibration Bull., 48(1), 65–75.
13.
Kelly, R. D., and Richman, G. (1969). Principles and techniques of shock data analysis, SVM‐5. The Shock and Vibration Information Center, United States Department of Defense.
14.
Kenley, R. M., and Dodds, C. J. (1980). “West Sole WE platform: Detection of damage by structural response measurements.” Proc., Offshore Technology Conference, OTC paper 3866, Houston, Tex., 111–118.
15.
Kennedy, C. C., and Pancu, C. D. P. (1947). “Use of vectors in vibration measurement and analysis.” J. Aerospace Sciences, 25(11), 603–625.
16.
Knapp, A. E., Green, D. J., and Etie, R. S. (1984). “Collision of a tanker with a platform.” Proc., Offshore Technology Conference, OTC paper 4734, 209–216.
17.
Lewis, R. C., and Wrisley, D. L. (1950). “A system for the excitation of pure natural modes of complex structures.” J. Aerospace Sciences, 17(11), 705–722.
18.
Loland, O., and Dodds, C. J. (1976). “Experiences in developing and operating integrity monitoring systems in the North Sea.” Proc., Offshore Technology Conference, OTC paper 2551, Houston, Tex., 313–320.
19.
Marshall, P. W. (1979). “Strategy for monitoring, inspection, and repair for fixed offshore platforms.” Struct. Integrity Tech., J. P. Gallagher, ed. ASME New York, N.Y., 97–110.
20.
Pappa, R. S. (1983). “Close mode identification performance of the ITD modal identification algorithm.” AIAA paper No. 83‐0878.
21.
Richardson, M. (1980). “Detection of damage in structures from changes in their dynamic (modal) properties—a survey.” NUREG/CR‐1431, University of California Radiation Laboratory 15103.
22.
Rubin, S., and Coppolino, R. N. (1983). “Flexibility monitoring of offshore jacket platforms.” Proc., Offshore Technology Conference, OTC paper 4535, 201–208.
23.
Shahrivar, F., and Bouwkamp, J. G. (1982). “Model study of effects of damage on the vibration properties of steel offshore platforms.” EERC Report No. 82‐05, Earthquake Engineering Research Center, University of California, Berkeley, Calif.
24.
Shahrivar, F., and Bouwkamp, J. G. (1984). “Damage detection in offshore platforms using vibration information.” Proc., 3d Offshore Mechanics and Arctic Engineering Symp., ASME, Vol. II, 174–185.
25.
Shahrivar, F., and Bouwkamp, J. G. (1984). “Damage detection in offshore platforms using vibration information.” Proc., 3d Intl. Offshore Mechanics and Arctic Engineering Symp., ASME, Vol. II, 174–185.
26.
Vandiver, I. K. (1975). “Detection of structural failure on fixed platform by measurement of dynamic response.” Proc., Offshore Technology Conference, OTC paper 2267, Houston, Tex., 243–252.
27.
Voorhees, C. R., and Clark, G. A. (1984). “Discussion of modal test techniques as applied to a spacecraft structure.” Proc. Aerospace Congress and Exposition, Society of Automotive Engineers, Inc.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Mar 1, 1989
Published in print: Mar 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.