Elastic‐Plastic Bar under Changes in Temperature and Axial Load
Publication: Journal of Structural Engineering
Volume 115, Issue 12
Abstract
Quantitative examples of the hysteretic behavior of an elastic‐plastic bar are presented by making use of the basic equations that have been derived in a preceding paper in a simple closed form. The prismatic bar is subjected repeatedly to axial loading, which may be applied by changes in temperature or forced displacements. Behavioral demonstration is preceded by a brief description of the basic equations with underlying assumptions. Thermal cycling beginning with a rise in temperature can cause bending combined not only with the compressive but also with the tensile force due to plastic deformation in an axially constrained bar. Similarly, a recurring reduction in the distance between the bar ends can bring about bending in combination with tension as well as with compression, and can give rise to an eventual plastic elongation. A comparison of the theoretical behavior to the experimental behavior indicates the validity of the theory as a reasonable first‐order approximation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Culver, C., Aggarwal, V., and Ossenbruggen, P. (1973). “Buckling of steel columns at elevated temperatures.” J. Struct. Div., ASCE, 99(4), 715–726.
2.
European recommendations for the fire safety of steel structures. (1983). European Convention for Constr. Steelwork, Elsevier, Amsterdam, The Netherlands, 21.
3.
Nonaka, T. (1973). “An elastic‐plastic analysis of a bar under repeated axial loading.” Int. J. Solids and Structs., 9(5),
Erratum in 9(10), 569–580.
4.
Nonaka, T. (1977a). “Approximation of yield condition for the hysteretic behavior of a bar under repeated axial loading.” Int. J. Solids and Structs., 13(7), 637–643.
5.
Nonaka, T. (1977b). “An analysis for large deformation of an elastic‐plastic bar under repeated axial loading, I: Derivation of basic equations.” Int. J. Mech. Sci., 19(10), 619–627.
6.
Nonaka, T. (1977). “An analysis for large deformation of an elastic‐plastic bar under repeated axial loading, II: Correlation with small deformation theory.” Int. J. Mech. Sci., 19(11), 631–638.
7.
Nonaka, T. (1987). “Formulation of inelastic bar under repeated axial and thermal loadings.” J. Engrg. Mech., ASCE, 113(11),
Errata in 114(4), 1647–1664.
8.
Nonaka, T., and Iwai, S. (1988). “Failure of bar structures under repeated loading.” Structural Failure, T. Wierzbicki and N. Jones, eds., John Wiley Interscience, New York, N.Y., 389–433.
9.
Ossenbruggen, P. J., Aggarwal, V., and Culver, C. G. (1973). “Steel column failure under thermal gradients.” J. Struct. Div., ASCE, 99(4), 727–739.
10.
Roeder, C. W. (1986). “Experimental study of heat induced deformation.” J. Struct. Engrg., ASCE, 112(10), 2247–2262.
11.
Wakabayashi, M., et al. (1973). “Experimental studies on the behavior of steel bars under repeated axial loading—Part 1, rectangular cross‐section.” Kyoto Univ. Disaster Prevention Res. Inst. Annuals, 16B, Kyoto Univ., Kyoto, Japan, 113–125 (in Japanese).
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Dec 1, 1989
Published in print: Dec 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.