Shaking Table Tests of Pinned‐Base Steel Gable Frame
Publication: Journal of Structural Engineering
Volume 115, Issue 12
Abstract
In the United States, design of steel gable frames normally follows the guidelines prescribed by the American Institute of Steel Construction for assumed wind and gravity loadings. In this study, a pinned‐base steel gable frame structure composed of prismatic members is constructed, and the dynamic characteristics of that structure are investigated using the shaking table. The tests are carried well into the inelastic range so that ultimate lateral strength under seismic excitation can be quantified. It is observed that for such structures the response modification factor adopted by the Applied Technology Council (ATC) should be assumed with caution. In addition, the excessive elastic and inelastic story drifts, which are attributed to the pinned‐base condition, require careful evaluation to ensure structural safety against large sidesways. The excessive story drift is likely one of the major reasons for the severe nonstructural damage of steel gable frames during the 1985 Chile earthquake and the 1987 Edgecumbe earthquake.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bertero, V. V. (1986). “Implications of recent earthquakes and research on earthquake resistant design and construction of buildings.” Report No. EERC 86/03, Earthquake Engrg. Res. Center, Univ. of California, Berkeley, Calif., Mar.
2.
Griffiths, J. D. (1956), Single span rigid frames in steel. Am. Inst. of Steel Constr., Chicago, Ill.
3.
Hwang, J. S., Chang, K. C., and Lee, G. C. (1987). “The system characteristics and performance of a shaking table.” Tech. Report NCEER‐87‐0004, Nat. Center for Earthquake Engrg. Res., State Univ. of New York, at Buffalo, Buffalo, N.Y.
4.
Kaya, I., and McNiven, H. D. (1978). “Investigation of the elastic characteristic of a three story steel frame using system identification.” Report No. EERC 78/24, Earthquake Engrg. Res. Center, Univ. of California, Berkeley, Calif.
5.
Ketter, R. L. (1983). “The UB seismic simulator.” Engrg. Progress of We stern New York, 3(2), 6–8.
6.
Korn, M. P. (1953). Steel rigid frames—Manual, design and construction. J. W. Edwards, Inc., Ann Arbor, Mich.
7.
Lee, G. C., Ketter, R. L., and Hsu, T. L. (1981). Design of single story rigid frames. Metal Building Manufacturers Assoc., Cleveland, Ohio.
8.
Manual of steel construction. (1980). 8th Ed., Am. Inst. of Steel Constr., Chicago, Ill.
9.
Pender, M. J., and Robertson, T. W. (1987). “Edgecumbe earthquake: Reconnaissance report.” Earthquake Spectra, 3(4), 659–745.
10.
“Production profile, an absolute linear position‐displacement transducer system.” (1985). Temposonics, Inc., MTS Corp., Minneapolis, Minn.
11.
“Tentative provisions for the development of seismic regulation for buildings.” (1978). Special Publication 510 (ATC Report 3‐06), Appl. Tech. Council, U.S. Nat. Bureau of Standards, Washington, D.C., June.
12.
“The Chile earthquake of March 3, 1985—Performance of structures.” Earthquake Spectra, 2(2), 293–371.
13.
Uang, C. M., and Bertero, V. V. (1986). “Earthquake simulation tests and associated study of a 0.3‐scale model of a six‐story concentrically braced steel structure.” Report No. EERC 86/10, Univ. of California, Berkeley, Calif., Dec.
14.
Valdimarsson, H., Shah, A. H., and McNiven, H. D. (1981). “Linear model to predict the nonlinear seismic behavior of a one‐story steel frame.” Report No. EERC Earthquake Engrg. Res. Ctr., Univ. of California, Berkeley, Calif.
15.
Whittaker, A. S., Uang, C. M., and Bertero, V. V. “Earthquake simulation tests and associated studies of a 0.3‐scale model of a six‐story eccentrically braced steel structure.” Report No. EERC 87/02, Univ. of California, Berkeley, Calif., Jul.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Dec 1, 1989
Published in print: Dec 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.