Ultimate Strength of RC Wall Panels in One‐Way In‐Plane Action
Publication: Journal of Structural Engineering
Volume 115, Issue 10
Abstract
Test results of 24 reinforced concrete wall panels in one‐way in‐plane action are presented. The panels were loaded at a small eccentricity to reflect possible eccentric loading in practice. Influences of slenderness ratio, aspect ratio, vertical steel, and horizontal steel on the ultimate load are studied. An empirical equation modifying two existing methods is proposed for the prediction of ultimate load. The modified equation includes the effects of slenderness ratio, amount of vertical steel, and aspect ratio. The results predicted by the proposed modified method and five other available equations are compared with 48 test data. The proposed modified equation is found to be satisfactory and, additionally, includes the effect of aspect ratio which is not present in other methods.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Building code requirements for reinforced concrete.” (1977). ACI 318‐1977, Part 4, American Concrete Institute, Detroit, Mich.
2.
“Code of practice for the structural use of concrete.” (1972). BS CP 110‐1972 Part‐1, British Standards Institution, London, England.
3.
Davies, J. M. (1987). “Axially loaded sandwich panels.” J. Struct. Engrg., ASCE, 113(11), 2212–2230.
4.
Desayi, P., and Gopal, K. (1987). “Ferrocement wall elements subjected to loads at small eccentricity.” Proc. Seminar on Recent Trends in Structural Analysis and Design, Bangalore, India, C111–C119.
5.
Desayi, P., and Joshi, A. D. (1976). “Ferrocement load bearing wall elements.” J. Struct. Div., ASCE, 102(9), 1903–1916.
6.
Desayi, P., and Madina Saheb, S. (n.d.). “A brief review of the studies on reinforced concrete wall panels.” Indian Concr. J., in press.
7.
“Design of precast concrete wall panels.” (1971). ACI Committee 533, Am. Concr. Inst. J., 68(7), 504–513.
8.
“Indian standard code of practice for plain and reinforced concrete.” (1978). IS 456‐1978, Indian Standards Inst., New Delhi, India.
9.
Kripanarayanan, K. M. (1977). “Interesting aspects of the empirical wall design equation.” Am. Concr. Inst. J., 74(5), 204–207.
10.
Kripanarayanan, K. M., and Fintel, M. (1976). “Wall panels—analysis and design criteria.” Report 3, Design and Construction of Large Panel Concrete Structures, Portland Cement Assoc.
11.
Leabu, V. F. (1965). “Precast concrete wall panels—design trends and standards.” Symp. on Precast Wall Panels, Special Publication SP‐11, Paper No. 3, American Concrete Institute, 31–44.
12.
Leabu, V. F. (1959). “Problems and performance of precast concrete wall panels.” Am. Concr. Inst. J., 56(10), 287–298.
13.
Madina Saheb, S. (1985). “Strength and behaviour of reinforced concrete wall panels,” thesis presented to the Indian Institute of Science, at Bangalore, India, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
14.
Oberlender, G. D. (1973). “Strength investigation of precast reinforced concrete load bearing wall panels,” dissertation presented to University of Texas, at Arlington, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
15.
Oberlender, G. D., and Everard, N. J. (1977). “Investigation of reinforced concrete walls.” Am. Conor. Inst. J., 74(6), 256–267.
16.
Pillai, S. U., and Parthasarathy, C. V. (1977). “Ultimate strength and design of concrete walls.” Building and Envir., 12(1), 25–29.
17.
Seddon, A. E. (1956). “The strength of concrete walls under axial and eccentric loads.” Symp. on Strength of Concrete Structures, Cement and Concrete Association, 445–486.
18.
“Tests for precast wall panels.” (1964). ACI Committee 533, Subcommittee V. Am. Concr. Inst. J., 61(4), 369–382.
19.
Zielinski, Z. A., Troitsky, M. S., and Christodoulou, H. (1982). “Bearing strength investigation of thin‐wall ribbed reinforced concrete panels.” Am. Concr. Inst. J., 79(4), 313–321.
20.
Zielinski, Z. A., Troitsky, M. S., and El‐Chakieh, E. (1983). “Fullscale bearing capacity tests on precast concrete thin wall—ribbed panels.” PCI J., 28(3), 88–103.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Oct 1, 1989
Published in print: Oct 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.