Finite Element Analysis of Postbuckled Shear Webs
Publication: Journal of Structural Engineering
Volume 114, Issue 7
Abstract
An isolated panel subjected to shear distortion is capable of carrying a shear force well in excess of that causing initial shear buckling, even when the boundary flanges have no bending strength. A finite element method (FEM) analysis confirms the view that the postbuckling strength is attributable to a nonuniform shear‐stress distribution along the boundaries, varying from the critical stress in one corner up to the shear‐yield stress in the tension corner with no need for any diagonal tension. The presence of flanges with bending strength does permit the development of diagonal tension. However, light flanges give no increase in shear resistance. Impractically heavy flanges are shown to be capable of developing true diagonal tension, giving an increase in total shear capacity. The FEM analysis is applied to plate girders for which test results are known and is shown to provide reliable predictions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ajam, W. (1986). “Finite element study of the post‐buckling behaviour of plate girder panels under shear load.” Thesis presented to Concordia Univ. at Montreal, Canada, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
2.
Basler, K. (1969). “Strength of plate girders in shear.” J. Struct. Div., ASCE, part 1, 97(ST7), 151–180.
3.
Dubas, P. (1980). “Behaviour and design of steel plate structures.” European Convention Constructional Steelwork Publications No. 44, 110–112.
4.
Fujii, T. (1971). “A comparison between the theoretical values and the experimental results for the ultimate shear strength of plate girders.” Proc. IABSE Colloquium, Int. Assoc., for Bridge and Structural Engineering, London, U.K.
5.
Johnston, B. (1976). Guide to stability design criteria for metal structures. 3d Ed., John Willey and Sons, New York, N.Y.
6.
Marsh, C. (1982). “Theoretical model for collapse of shear webs.” J. Engrg. Mech. Div., ASCE, 108(5), 819–832.
7.
Marsh, C. (1985). “Photoelastic study of postbuckled shear webs.” Canadian J. of Civ. Engrg., 12(2), 415–417.
8.
Marsh, C., and Ajam, W. (1987). “Post‐buckling strength of shear webs without diagonal tension.” Int. Conf. on Steel & Aluminium Struct., Cardiff, U.K.
9.
Porter, D. M., Rockey, K. C., and Evans, H. R. (1975). “The collapse behaviour of plate girders loaded in shear.” Struct. Engr., 53(8), 312–325.
10.
Rockey, K. C., and Skaloud, M. (1968). “Influence of flange stiffness upon the load carrying capacity of webs in shear.” Proc. 8th Cong., International Association for Bridge and Structural Engineering, New York, N.Y.
11.
Rockey, K. C., and Skaloud, M. (1972). “The ultimate load behaviour of plate girders loaded in shear.” Struct. Engr., 50(1), 29–47.
12.
Timoshenko, S., and Gere, J. (1961). “Theory of elastic stability.” McGraw‐Hill Book Co., Inc., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Jul 1, 1988
Published in print: Jul 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.