Effect of Modeling on NLFE Analysis of Concrete Structures
Publication: Journal of Structural Engineering
Volume 114, Issue 7
Abstract
This paper describes a technique of modeling concrete material properties for use in smeared cracking nonlinear finite element analysis of two‐dimensional reinforced concrete structures. The technique is applied to, and the predicted results are compared with, experimental results of 11 concrete beams which include examples both with and without web reinforcement, and for which the shear‐span‐to‐depth ratio varies from 0.5–7. Reasonable correspondence with test results is obtained for all of the six different failure modes exhibited by the test beams. The effect of varying the material parameters on the finite element prediction is examined, and a limited study of the effect of mesh refinement and variation of fracture energy parameters is included. It is concluded that nonlinear finite element analysis has developed to the point where reliable ultimate load analyses of two‐dimensional concrete structures can be carried out.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Balakrishnan, S., and Murray, D. W. (1986). “Finite element prediction of reinforced concrete behavior.” Struct. Engrg. Report No. 138, University of Alberta, Edmonton, Canada.
2.
Balakrishnan, S., and Murray, D. W. (1988a). “Concrete constitutive model for NLFE analysis of structures.” J. Struct. Engrg., ASCE, 114(7), 1449–1466.
3.
Balakrishnan, S., and Murray, D. W. (1988b). “Prediction of R/C panel and deep beam behavior by NLFE analysis.” J. Struct. Engrg., ASCE, (Accepted for publication).
4.
Bazant, Z. P., and Oh, B. H. (1983). “Crack band theory forfracture of concrete.” Materials and Structures, RILEM, Paris, France, 16, 155–177.
5.
Bedard, C., and Kotsovos, M. D. (1985). “Application of NLFEA to concrete structures.” J. Struct. Div., ASCE, 111(ST12).
6.
Bresler, B., and Scoredelis, A. C. (1963). “Shear strength of reinforced concretebeams.” Journal of the Amer. Concrete Inst., 60(1), pp. 51–73.
7.
Burns, N. H., and Seiss, C. P. (1966). “Repeated and reversed loading in reinforced concrete.” J. Struct. Div., ASCE, 92(ST5), 65–78.
8.
Elwi, A. E., and Murray, D. W. (1980). “FEPARCS5—A finite element program for the analysis of axisymmetric reinforced concrete structures, users manual.” Structural Engineering Report No. 93, University of Alberta, Edmonton, Canada.
9.
Elwi, A. E., and Murray, D. W. (1984). “Nonlinear analysis of reinforced and prestressed containments.” Proc. of the International Conference on Computer‐Aided Analysis and Design of Concrete Structures, Split, Yugoslavia.
10.
Kani, M. W., Huggins, M. W., and Wittkopp, R. R. (1979). Kani on shear in reinforced concrete. University of Toronto Press, Toronto, Canada.
11.
Kupfer, H., Hilsdorf, H.‐K., and Rusch, H. (1969). “Behavior of concrete under biaxial stresses.” Journal of the Amer. Concrete Inst., 66(8), 656–666.
12.
Leonhardt, F., and Walther, R. (1966). “Wandertige trager.” Deutscher Ausschuss für Stahlbeton, Heft 178, Berlin, West Germany.
13.
Rogowsky, D. M., and MacGregor, J. G. (1983). “Tests of reinforced concrete deep beams.” Struct. Engrg. Report No. 109, University of Alberta, Edmonton, Canada.
14.
State of the art report on finite element analysis of reinforced concrete. (1982). ASCE, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Jul 1, 1988
Published in print: Jul 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.