Design Rules of Built‐Up Members in Load and Resistance Factor Design
Publication: Journal of Structural Engineering
Volume 114, Issue 11
Abstract
The AISC‐LRFD (American Institute of Steel Construction‐Load and Resistance Factor Design Specification for Structural Steel Buildings) Specification provides rules for design of built‐up members. The slenderness ratios of built‐up members that may buckle out‐of‐plane, say, about the Y‐Y axis for a two‐back‐toback‐angle member are discussed. Based on the LRFD equation (E4‐1) and the usual concept of the effective length factor, a modification of the slenderness ratios for built‐up members as given in the present LRFD Specification is proposed. The proposed formula with local effective length factor is concise, simple, and physically clear. It is consistent with the effective length factor recommended by the LRFD Specification, and has only one equation considering the effects of shear and connectors on buckling of built‐up members. The calculated results of the proposed formula are found to be in good agreement with available test results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Astaneh, A. A., Goel, S. C., and Hanson, R. D. (1985). “Cyclic out‐of‐plane buckling of double‐angle bracing.” J. Struct. Engrg., ASCE, 111(5), 1135–1153.
2.
Ballio, G., and Mazzolani, F. M. (1983). Theory and design of steel structures. Chapman and Hall, London, England.
3.
Bleich, F. (1952). Buckling strength of metal structures. McGraw‐Hill, New York, N.Y.
4.
Engesser, F. (1891). “Die knickfestigkeit gerader stabe.” Zentralbl. Bauverwaltung, 11 (in German).
5.
Engesser, F. (1909). “Uber die knickfestigkeit von rahmenstaben.” Zentralbl. Bauverwaltung, 29 (in German).
6.
Holt, M. (1940). “Tests on built‐up columns of structural aluminum alloys.” Trans., ASCE, 105, 196–217.
7.
Johnston, B. G. (1971). “Spaced steel columns.” J. Struct. Div., ASCE, 97(5), 1465–1479.
8.
Jones, B. D. (1952). “A theory for struts with lattice or battened column.” Struct. Engr., 30(5), London, England, 108–113.
9.
Kennedy, J. B., and Murty, M. K. S. (1972). “Buckling of steel angle and tee struts.” J. Struct. Div., ASCE, 98(11), 2507–2522.
10.
Kitipornchai, S., and Lee, H. W. (1986a). “Inelastic buckling of single angle, tee and double‐angle struts.” J. Constr. Steel Res., 6(1), 3–20.
11.
Kitipornchai, S., and Lee, H. W. (1986b). “Inelastic experiments of angle and tee struts.” J. Constr. Steel Res., 6(3), 219–236.
12.
Koenigsberger, F., and Mohsin, M. E. (1956). “Design and load carrying capacity of welded and battened struts.” Struct. Engr., 34(6), London, England, 183–203.
13.
Lin, F. J., Glauser, E. C., and Johnston, B. G. (1970). “Behavior of laced and battened structural members.” J. Struc. Div., ASCE, 96(7), 1377–1401.
14.
Load and resistance factor design specification for structural steel buildings. (1986). American Institute of Steel Construction, Chicago, Ill.
15.
Mohsin, M. E. (1965). “The critical load of unsymmetrical welded battened struts.” Struct. Engr., 43(11), London, England, 379–385.
16.
Pippard, A. J. S. (1948). “The critical load of a battened column.” Philosophical Magazine, 39(288), London, England, 58–66.
17.
Specification for the design, fabrication and erection of structural steel for buildings. (1978). American Institute of Steel Construction, Chicago, Ill.
18.
Steel structures for buildings (limit states design), CAN3‐S16.1‐M84. (1984). Canadian Standards Association, Rexdale, Ontario, Canada.
19.
Tamayo, J. Y., and Ojalvo, M. (1965). “Buckling of three‐legged columns with batten bracing.” J. Struct. Div., ASCE, 91(1), 141–153.
20.
Timoshenko, S., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw‐Hill, New York, N.Y.
21.
Williamson, R. A., and Margolin, M. N. (1966). “Shear effects in design of guyed towers.” J. Struct. Div., ASCE, 92(5), 213–235.
22.
Young, D. H. (1936). “Rational design of steel columns.” Trans., ASCE, 101, 422–451.
23.
Zahn, C. J., and Haaijer, G. (1987). “Effect of connector spacing on double angle compressive strength.” Proc. Materials and Member Behavior, ASCE, 199–212.
24.
Zandonini, R. (1985). “Stability of compact built‐up struts: Experimental investigation and numerical simulation.” Construzione Metalliche, Milan, Italy, 202–224 (in Italian and English).
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Nov 1, 1988
Published in print: Nov 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.