Layering of RC Membrane and Plate Elements in Nonlinear Analysis
Publication: Journal of Structural Engineering
Volume 114, Issue 11
Abstract
Use of a layering technique in general nonlinear finite element (FE) analysis of reinforced‐concrete flat shell elements is introduced. Stack of simple four‐node plane stress and Mindlin plate elements is used to simulate RC elements subjected to membrane and bending loads. Transverse shear deformations are taken into account and compatibility between layers is satisfied by means of nodal constraint equations. The method along with nonlinear constitutive models for concrete and steel are implemented in a FE program. Efficient stiffness calculation, assembly, and solution algorithms are employed to minimize the computational effort. Experimental specimens are analyzed. The results indicate the effectiveness and efficiency of the layering technique in simulating the behavior under membrane as well as flexural loading cases. The provided flexibility in the thickness direction makes it possible to model transverse shear deformations and to simulate bond degradation between concrete and steel. The importance of simulating such phenomena in predicting realistic cracking patterns is demonstrated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barzegar, F., and Schnobrich, W. C. (1986). “Nonlinear finite element analysis of reinforced concrete under short term monotonic loading.” SRS 530, Civil Engineering Studies, Univ. of Illinois, Urbana, Ill., Nov.
2.
Barzegar, F., and Schnobrich, W. C. (1987). “Skew anisotropic reinforcement in 2‐D reinforced concrete elements.” Proc. 2nd Int. Conf. and Short Course on Constitutive Laws for Engrg. Materials: Theory and Applications, Univ. of Arizona/Rensselaer Polytech. Inst., vol. 2, pp. 813–820, Jan.
3.
Bažant, Z. P., and Oh, B. H. (1981). “Concrete fracture via stress‐strain relations.” Report No. 81‐10/665C, Ctr. for Concrete and Geomaterials, Tech. Inst., Northwestern Univ., Evanston, Ill., Oct.
4.
Belytschko, T., and Tsay, C. S. (1983). “A stabilization procedure for the quadrilateral plate element with one‐point quadrature.” Int. J. Numer. Meth. in Engrg., 19(3) 405–419.
5.
Bicanic, N., and Hinton, E. (1979). “Spurious modes in two‐dimensional isoparametric elements.” Int. J. Numer. Meth. in Engrg., 14(10), 1545–1557.
6.
Burns, N. H., and Siess, C. P. (1962). “Load‐deformation characteristics of beamcolumn connections in reinforced concrete.” SRS No. 234, Civil Engineering Studies, Univ. of Illinois, Urbana, Ill., Jan.
7.
Cardenas, A., and Sozen, M. A. (1968). “Strength and behavior of isotropically and nonisotropically reinforced concrete slabs subjected to combinations of flexural and torsional moments.” SRS No. 336, Civil Engineering Studies, Univ. of Illinois, Urbana, Ill., May.
8.
de Borst, R., and Nauta, P. (1985). “Non‐orthogonal cracks in a smeared finite element model.” Engrg. Computations, 2(1), 35–46.
9.
Finite element analysis of reinforced concrete. (1982). Task Committee on Concrete and Masonry Structures, ASCE, New York, N.Y.
10.
Hand, F. R., Pecknold, D. A., and Schnobrich, W. C. (1972). “A layered finite element nonlinear analysis of reinforced concrete plates and shells.” SRS No. 389, Civil Engineering Studies, Univ. of Illinois, Urbana, Ill., Aug.
11.
Hughes, T. J. R., Taylor, R. L., and Kanoknukulchai, W. (1977). “A simple and efficient finite element for plate bending.” Int. J. Numer. Meth. in Engrg., 11(10), 1529–1543.
12.
Hughes, T. J. R., Cohen, M., and Haroun, M. (1978). “Reduced and selective integration techniques in the finite element analysis of plates.” Nuclear Engrg. and Design, 46(1), 203–222.
13.
Kupfer, H. B., Hilsdorf, H. K., and Rüsch, H. (1969). “Behavior of concrete under biaxial stresses.” J. Am. Concr. Inst., 66(8), 656–666.
14.
Mawenya, A. S., and Davies, J. D. (1974). “Finite element bending analysis of multilayer plates.” Int. J. Numer. Meth. in Engr., 8(2), 215–225.
15.
Mindlin, R. D. (1951). “Influence of rotary inertia and shear on flexural motions of isotropic elastic plates.” J. Appl. Mech., 18(1), 31–38.
16.
Ottosen, N. S. (1979). “Constitutive model for short‐term loading of concrete.” J. Engrg. Mech. Div., ASCE, 105(1), 127–141.
17.
Park, K. C., and Flaggs, D. L. (1985). “A symbolic Fourier synthesis of a one point integrated quadrilateral plate element.” Comp. Meth. in Appl. Mech. and Engrg., 48(2), 203–236.
18.
Rots, J. G. (1983). “Prediction of dominant cracks using the smeared crack concept.” Report No. BI‐83‐39, Dept. of Civ. Engrg., Delft Univ. of Tech., Delft, The Netherlands, Aug.
19.
Vecchio, F., and Collins, M. P. (1982). “The response of reinforced concrete to inplane shear and normal stresses.” Publication No. 82‐03, Univ. of Toronto, Toronto, Ontario, Canada, Mar.
20.
Welch, G. B., and Haisman, B. (1969). “Fracture toughness measurements of concrete.” Uniciv. Report No. R42, Univ. of New South Wales, Sydney, Australia, Jan.
21.
Whitney, J. M. (1969.) “Bending‐extensional coupling in laminated plates under transverse loading.” J. Composite Materials, 3(1), 20–28.
22.
Whitney, J. M. (1969.) “The effect of transverse shear deformation on the bending of laminated plates.” J. Composite Materials, 3(3), 534–547.
23.
Whitney, J. M., and Pagano, N. J. (1970.) “Shear deformation in heterogeneous anisotropic plates.” J. Appl. Mech., 37(4), 1031–1036.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Nov 1, 1988
Published in print: Nov 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.