Generalized Nonuniform Torsion of Beams and Frames
Publication: Journal of Structural Engineering
Volume 113, Issue 8
Abstract
The general torsional boundary conditions are considered for the steel beam‐frame structures with I‐ and C‐shaped cross sections. The algorithm is originated for the stress analyses of beams with generalized torsional boundary conditions and torsional loadings. This algorithm is utilized for analyses with microcomputers. In addition to the first degree of deformation compatibility (so‐called “effect of framing participation”), the second degree is introduced—compatibility of warping deformations for the frame joints. The numerical example of the frame in bending shows significant discrepancies in the normal and shear stresses calculated by existing standard computer programs and by exact solution for this frame. Along with the exact method of frame analysis which involves the generalized slope‐deflection method, an approximate method of frame analysis, the method of identical joint rotations (MIJR), is proposed and compared with the exact solution. MIJR can be used with the existing standard computer programs.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Darkov, A., Structural Mechanics, Mir Publishers, Moscow, U.S.S.R. 1979 (in English).
2.
El Darwish, I. A., and Johnston, B. G., “Torsion of Structural Shapes,” Journal of the Structural Division, ASCE, Vol. 91, No. 1, Feb., 1965, pp. 203–228.
3.
Goldberg, J. E., “Torsion of I‐Type and H‐Type Beams,” Transactions, ASCE, Vol. 118, 1953, pp. 771–793.
4.
Heins, C. P., Jr., and Seaburg, P. A., Torsion Analysis of Rolled Steel Sections, Design Data Handbook 1963‐B, Bethlehem Steel Corp., New York, N.Y., 1963.
5.
Hotchkiss, J. G., “Torsion of Rolled Steel Sections in Building Structures,” Engineering Journal, AISC, Vol. 3, No. 1, Jan., 1966, pp. 19–45.
6.
Johnson, B. G., “Design of W‐Shapes for Combined Bending and Torsion,” Engineering Journal, AISC, Vol. 19, No. 2, 1982, pp. 65–85.
7.
Lin, P. H., Discussion of “Design of W‐Shapes for Combined Bending and Torsion” by B. G. Johnston, Engineering Journal, AISC, Vol. 20, No. 2, 1983, pp. 82–88.
8.
Lin, P. H., “Simplified Design for Torsional Loading of Rolled Steel Members,” Engineering Journal, AISC, Vol. 14, No. 3, 1977, pp. 98–107.
9.
Manual of Steel Construction, 8th ed., AISC, Chicago, Ill., 1980.
10.
Medwadowski, S. J., “Warping Moment Distribution,” Journal of Structural Engineering, ASCE, Vol. 11, No. 2, Feb., 1985, pp. 453–466.
11.
Oden, J. T., Finite Elements of Non‐Linear Continua, McGraw‐Hill Book Co., Inc., New York, N.Y., 1972.
12.
Oden, J. T., and Ripperger, A. E., Mechanics of Elastic Structures, 2nd ed., Hemisphere, Washington, D.C., 1981.
13.
Salmon, C. G., and Johnson, J. E., Steel Structures, Design and Behavior, 2nd ed., 1980, pp. 410–424.
14.
Timoshenko, S., “Buckling of W‐Shaped Beams,” Bulletin of the Polytechnical Institute, Vol. 4–5, St. Petersburg, Russia, 1905–1906 (in Russian).
15.
Timoshenko, S., “Theory of Bending, Torsion and Buckling of Thin‐Walled Members of Open Cross Section,” Journal of the Franklin Institute, Vol. 239, Nos. 3, 4, and 5, 1945, pp. 201–219, 249–268, and 343–361.
16.
Vacharajittiphan, P., and Trahair, N. S., “Warping and Distortion at I‐Section Joints,” Journal of Structural Division, ASCE, Vol. 100, No. 3, Mar., 1974, pp. 547–564.
17.
Wagner, H., “Torsion and Buckling of Open Sections,” Technical Memorandum No. 807, National Advisory Committee for Aeronautics, Washington, D.C., 1936.
18.
Zienkiewicz, O. C., The Finite Element Method, 3rd ed., McGraw‐Hill Book Co., Inc., New York, N.Y., 1979.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Aug 1, 1987
Published in print: Aug 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.